Table of Contents
Advertisement
Step 6a. ACTION / Navigation
Button
GETTING
STARTED
Press the ACTION
button to select main menu items.
Press the •
or •
arrows to
highlight sub menus.
Press the • arrow to select features.
Press the • or • arrows
to scroll through options within a feature.
Press the 41 arrow to return to main menu
items.
Remote ACTION / Navigation Button
Note:
Be careful to press ACTION in the middle of the button. If you do not press in the
middle of the button, the arrow buttons r_ay be activated.
Step 7. Antenna/Cable
Mode
Select either Antenna
or Cable mode, depending
on the type of incoming signal you
are using.
Cable must be 8VSB format.
Procedure
[]
In SET UP Menu, select INPUT to choose either ANTENNA or Cable.
[]
Press the • arrow, then the • and • arrows to select ANTENNA, Cable STD, Cable HRC
or Cable IRC.
•
ANTENNA - VHF/UHF
CableSTD - StandardCableTV Signals
Cable HRC - HarmonicRelatedCarrier
•
Cable IRC - Incremental R elatedCarrier
Note:
Contact your local cable provider if you are not sure which setting to use.
[]
Press the ACTION button to make your selection.
[3
Press the q arrow to exit back to Roller Guide.
Note:
Whenever the antenna or cable mode is changed, Timer 1 and Timer 2 will revert back
to default settings.
GET UP
SELECT
ANTENNA
[]
Advertisement
Table of Contents
