Table of Contents
Advertisement
SPECIAL
FEATURF-q
Special Features
SET UP
Antenna/Cable
Mode
Select either Antenna or Cable mode, depending
on the type of incoming signal you
are using. Cable must be 8VSB format.
Procedure
[]
In SET UP Menu, select INPUT to choose either ANTENNA or Cable,
[]
Press the Ib arrow, then the •
and •
arrows to select ANTENNA,
Cable STD, Cable HRC
or Cable IRC.
ANTENNA - VHF/UHF
Cable STD - Standard Cable TV Signals
Cable HRC - Harmonic Related (_arrier
Cable IRC - Incremental Related Carrier
Note:
Contact your local cable provider if you are not sure which setting to use.
[_
Press the ACTION button to make your selection.
[]
Press the •
arrow to exit back to Roller Guide.
Note:
Whenever the antenna or cable mode is changed, Timer I and Timer 2 will revert back
to default settings.
SET UP
SELECT
ANTENNA
Programming
Available
Channels
You must
perform
the automatic
channel
programming
before
manually
adding
and
deleting channels because of the digital tuning system used by the STB.
This method
will ensure that every available channel will be captured and stored into memory.
Automatic
Channel
Programming
The STB will scan for all available
channels and store them in memory.
The scan will
normally
take several minutes to complete.
Procedure
[]
In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal.
Press the ACTION button to cancel or exit back to SET UP Menu.
Note:
As
more
digital
channels
become
available
in your
area,
the AUTO
feature
must be selected
to store the new digital channels
into memory.
[]
Advertisement
Table of Contents
