Special Features; Child Lock - Bosch Nexxt 800 series Operating, Care And Installation Instructions Manual

Display Symbols
Function
Symbol
÷÷
%
Washing
Mode
Settings
Normal
Wash
Quick
Wash
Stain
0n/0ff
Removal
Pre-Soak 0n/0ff
Off,
[]_)) Signal Continuous,
Max
•-0 Child lock 0n/0ff
Special features
Auto Load adjust
"Auto Load adjust" adjusts the water
and energy consumption for each
program and determines the amount of
laundry.
This process is built into your machine
and occurs automatically.
This control reduces water and energy
consumption when washing small
loads.
Unbalanced load detection system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
If the wash load is unevenly distributed,
it will not spin (for safety reasons) or the
final spin speed is reduced.
In the Hand wash/wool program the
appliance will attempt to start the spin
cycle only twice in order to prevent
shrinking.
Displayed Time
Due to these and other characteristics
of the controls the actual cycle time will
vary.
When a program has been selected,
the expected cycle time is displayed.
The following will affect the displayed
time:
- Load size
- Repeated spin attempts to evenly
distribute load
%
Additional rinse cycles if excessive
foam occurs
Low water pressure
Selection of additional options,
e.g. "Rinse plus"
You may notice that these effects
(more or less time) change the
displayed time when they occur in
the cycle. If no options are
selected and these effects do not
occur, the time indicated will be
the time that the cycle will finish.
Child lock
You can secure your washing machine
to prevent selected functions from
being changed inadvertently (see quick
overview of individual settings, page
19).
If the child lock has been selected:
- No changes can be made while
the program is running.
- The door remains locked at the
end of the program.
Starting a program with "child
lock: on"
E3 Turn the program selector to the
desired program.
E3 Load the laundry and close the
door.
The Start/Pause indicator light
flashe_ (red).
Menu
%
Press the Start/Pause button and
hold down (5 seconds).
The program starts. The indicator
light is lit (red).
The child lock is activated.
To deactivate the child lock
temporarily press the Start/Pause
button again (for 5 seconds) until
the Start/Pause indicator light
flashes. Now you can change
programs or options. Press the
Start/Pause button to reactivate
the child lock.
D You can stop a running program
with activated child lock by turning
the program selector to "off'!!
The interrupted program will
continue when the machine is
turned on again.
Pausing the Program to
Add/Remove Laundry
Cl
%
Press the Start/Pause button and
hold down (5 seconds), child lock
is deactivated and program will be
interrupted.
You can stop a running program
with activated child lock by turning
the program selector to "off'!!
When you switch it on again the
interrupted program will continue.
Unloading laundry at
of a cycle with "child
Cl
%
the end
lock: on"
Press the Start/Pause button and
hold down (5 seconds).
You can open the door and
remove laundry.
The child lock setting remains
activated even if you switch off the
appliance.
Next time you switch on the
appliance child lock is activated.
The door is locked and no
changes can be selected.
Press the Start/Pause button (for
5 seconds) to open the door.
Deactivating the child lock
Cl
Cl
Turn the program selector to the
desired program to switch on the
appliance.
Press the Menu button until "Child
lock: on" is displayed.
The ".-o" symbol flashes.
Press the Select button until
"Child lock: off" is displayed.
You can set child lock on/off
before starting a program or in
"Pause" mode only.
2O