Craftsman 82312 Owner's Manual page 10

Safety
UL LISTED
This m eter isintended forindoor use
and protected, against the users, by
double insulation perEN61010-1
and IEC61010-1 2nd Edition (2001)
toCAT II 1O00V & CAT III600V;
Pollution Degree 2.The meter also
meets UL61010-1, Second Edition
(2004), CAN/CSA C22.2 No. 6 1010-
1,Second Edition (2004), andUL
61010B-2-031, First Edition (2003)
The ULmark d oes n ot i ndicate that
this product has been e valuated for
the accuracy ofitsreadings.
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOL TAGE CATEGORY I
Equipment of OVERVOLTAGE CATEGORY I is equipment for
connection to circuits in which measures are taken to limit the
transient overvoltages to an appropriate low level. Note -
Examples include protected electronic circuits.
OVERVOL TAGE CATEGORY II
Equipment of OVERVOLTAGE CATEGORY II is energy-
consuming equipment to be supplied from the fixed installation.
Note - Examples include household, office, and laboratory
appliances.
OVERVOL TAGE CATEGORY III
Equipment of OVERVOLTAGE CATEGORY III is equipment in
fixed installations.
Note - Examples include switches in the fixed installation and
some equipment for industrial use with permanent connection to
the fixed installation.
OVERVOL TAGE CATEGORY IV
Equipment of OVERVOLTAGE CATEGORY IV is for use at the
origin of the installation.
Note - Examples include electricity meters and primary over-
current protection equipment
10