Operation; Lcd Display - Craftsman 320.48298 Product Manual

LCD DISPLAY
Full battery indicator
Empty battery indicator
_ aser beam indicator
_ Area measurement
_ Volume measurement
[_ Pythagorean Theorem measurement
Indicates that the measurement is taken from the rear of the tool.
Indicates that the measurement is taken from the front of the tool.
"Your laser measuring tool is a precision instrument. Please observe the following
guidelines to ensure optimal performance.
o
0
Do not direct the laser-measuring tool towards the sun or other sources of
bright light° This may cause an Error reading or inaccurate measurements.
Do not use the laser measuring tool as a leveling tool.
Do not operate the laser measuring tool in wet, dusty, sandy, or other adverse
environments, Such conditions may damage inner components and affect
measuring accuracy.
When the laser measuring tool is brought into a warm environment from very
cold conditions, or vice versa, allow it to come to the surrounding tempera.-
ture before use.
Measuring errors can occur when measuring toward colorless liquids (e.g.,
water), clean glass, Styrofoam, or similar translucent or low-density materials.
High-gloss surfaces will deflect the laser beam and result in Error
measurements.
Very bright surroundings combined with a very low reflecting surface will
reduce the measuring range and accuracy,
Do not immerse the tool in water, Wipe off dirt with a damp, soft cloth. Do not
use aggressive cleaning agents or solutions. Treat the optical surfaces with
the same care that you would apply to eyeglasses or cameras,
The accuracy of the tool must be checked before use after it has been
dropped or subjected to other mechanical stresses.
48298 ManuaLRevised_0743225 Page 7