Turning On Your Equipment; Turning On The Document Camera - Epson ELPDC02 User Manual

Epson high resolution document imager user'sguide elpdc02

Hide thumbs Also See for ELPDC02:

Table of Contents

Using the Document Camera

Turning On Your Equipment

Make sure your document camera and other equipment are set up and

connected correctly, as described in Chapter 1. Always turn on your

projector or monitor first. Then turn on your document camera, as

described below, followed by any other equipment you've connected

to it.

You can turn on your computer and video equipment in any order. If

you have both a computer and video source connected, you may have

to switch to the desired source to see its image as described on

page 18.

Follow these steps to plug in and turn on the document camera:

1. Connect one end of the power cord to the document camera's

power inlet.

power

inlet

2. Connect the other end to a grounded electrical outlet.

3. Turn on the projector or monitor.

Table of Contents