Adjusting The Image Position And Size - Epson ELPDC02 User Manual

Adjusting the Image Position and Size

If you are displaying a
computer image using the
or output
Video S-Video
port, you can adjust its
position and size.
To adjust the image
position, use the
Position
arrow buttons on the remote
control.
To adjust the image size,
press and hold the
Main
button on the control panel.
Then use the right and/or down
remote control to enlarge the image. Use the up and/or left
arrow buttons to reduce the image.
The document camera will remember the position and size. If the
signal frequency of the
may need to readjust the position.
Remote control
arrow buttons on the
Position
Control panel
Main
or port changes, however, you
RGB1 RGB2
note
You can't adjust the position
or size of an image captured
Position arrow
buttons with the overhead camera or
an image output through the
RGB video output port.
Position
Using the Document Camera
21