note
The auto focus function
works up to a height of
approximately 3.9 in.
(10 cm) above the stage
.
surface
Remote control
Tele
Wide Near
Auto
Focus
Using the Document Camera
20
Adjusting the Image
Once you see your image, you may need to make certain adjustments:
To zoom or focus your image, see the next section.
I
If the image is too high or too low, you can reposition it. If the
I
image is too large or too small, you can resize it. See page 21.
If the image is too light or dark, see page 22.
I
Zooming and Focusing Your Image
Use the
button on the control panel or remote control to enlarge
Tele
the image, and use the
camera will automatically focus the image.
If you change items on the stage, press the
focus the image. The indicator light flashes until the image is focused.
The following objects may not focus well using the auto focus feature:
I
Objects with little contrast
Objects with a bright background or excessive contrast
I
Objects with fine repeated patterns or stripes
I
I
Objects that glitter or reflect bright light
Objects with varying depths of field
I
To manually focus these objects, use the
Control panel
Far
button to reduce it. The document
Wide
Auto Focus
Near
Tele
Near
button to
or
button.
Far
Wide
Far
Auto Focus