Brother MFC-9970CDW Network User's Manual page 34

Wireless configuration using the Brother installer application (For MFC-9560CDW)
(Macintosh)
1 Double-click the MFL-Pro Suite icon on your desktop.
2 Double-click the Utilities icon.
3 Double-click the Wireless Device Setup Wizard.
c
Choose Yes, my Access Point supports WPS or AOSS and I want to use them. or No and then click
Next.
When you choose No, you have the ability to configure the wireless setting in four different ways.
 Using a USB cable temporarily
 Using an Ethernet (LAN) cable temporarily
 Configuring through the control panel manually
 Using Ad-hoc mode
Note
For Ad-hoc setup users:
• If a message to restart your computer appears after the wireless settings have been changed, restart
your computer and then go back to step b.
• You can temporarily change the wireless settings on your computer.
®
(Windows Vista and Windows
1
Click the
2
Click Network and Internet and then the Network and Sharing Center icon.
3
Click Connect to a network.
4
You can see the SSID of the wireless machine on the list. Choose SETUP and then click Connect.
5
(For Windows Vista
Click Connect Anyway and then Close.
6
(Windows Vista
Click View status of Wireless Network Connection (SETUP).
®
7
(Windows 7)
Click Wireless Network Connection (SETUP).
8
Click Details.... and confirm the Network Connection Details screen. It may take a few minutes
to change from 0.0.0.0 to the 169.254.x.x IP address to be shown on screen (where x.x. are
numbers between 1 and 254).
®
7)
button and then Control Panel.
®
only )
®
)
4
4
29