Cleaning The Machine's Printer Platen - Brother MFC-J4710DW Advanced User's Manual

b
Wipe the outside of the machine with a
dry, soft lint-free cloth to remove dust.
c
Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d
Wipe the inside and outside of the paper
tray with a dry, soft lint-free cloth to
remove dust.
e
Close the output paper tray cover and
put the paper tray firmly back in the
machine.
Cleaning the machine's
printer platen
WARNING
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
b
Clean the machine's printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
IMPORTANT
DO NOT bend or apply too much pressure
on the nine tabs (2). They could be
damaged.
c
Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
d
A
Re-connect the power cord.
Routine maintenance
2
1
79
A