Using With The Ac Adaptor; Using With The Alkaline Battery - Sharp MD-DR370H Operation Manual

1-bit portable minidisc recorder
Table of Contents

Advertisement

Using with the AC Adaptor

MD-DR370H
ENGLISH
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 3V socket.
To the wall socket
AC 110 - 240V,
50/60 Hz
To the DC IN 3V socket
Caution:
   
Insert the plugs firmly.
   
When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Note:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise,
playback may start automatically when electricity
resumes.
E-5
MD-DR370H TINSZA024AWZZ

Using with the Alkaline Battery

Use one commercially available alkaline battery (LR6,
"AA" size).
1
2
3
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery according to the direc-
tion indicated in the battery compartment.
When inserting or removing the battery, push it to-
wards the
battery terminal.
4
Close the battery cover.
Notes:
   
Do not replace the battery during operation.
   
Do not use a nickel-cadmium battery.
   
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage
due to battery leakage.
   
Installing the battery incorrectly
may cause the unit to malfunc-
tion.
   
When the battery cover comes
2
off, attach the cover back as
shown on the right.
04/1/6
MD-DR370H_SEEG2.fm
1

Advertisement

Table of Contents
loading

Table of Contents