Sharp MD-DR370H Operation Manual page 19

5
Press the MENU/ENTER button.
6
Press the or button repeatedly to select "REC
MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to select the
recording mode (page 17).
(Stereo recording)
SP
(2 times long recording)
(4 times long recording)
(Monaural recording)
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc unit re-
cording.
11
Begin playback on the stereo system, the output
will be recorded.
Notes:





Complete the operation within 7 seconds whilst selecting
the menus.





Changing the volume level whilst recording does not affect
the recording.





You cannot adjust the bass level whilst recording.
MD-DR370H TINSZA024AWZZ





Whilst "TOC" is displayed, the MiniDisc recorded contents
are not yet updated.
TOC display
To interrupt recording
Press the button.





To resume recording, press the button again.





The track number will be increased by one each time the
recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD. The
"TOC" indicator disappears.
04/1/5 MD-DR370H_SEEG3.fm
MD-DR370H
ENGLISH
E-12