Advanced Recording - Sharp MD-DR470H Operation Manual

Advanced Recording

MD-DR470H
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (synchronised recording).
Cancel the setting for trace-back recording.
1
Press the REC button.
Recording is paused.
2
To perform group recording, hold down the
GROUP button for 2 seconds or more so
that "GR" is lit.
When group recording is not performed, hold down
the GROUP button for 2 seconds or more so that
"GR" goes out.
3
Start playback on the external equipment
and adjust the recording level by pressing
the or button (page 20).
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
5
Press the MENU button.
The unit enters the menu select mode.
6
Select "REC MODE" by pressing the
button and press the MENU button.
7
Select the recording mode (step 3, page 35)
and press the MENU button.
34
MD-DR470H(E) TINSE0513AWZZ
8
Press the MENU button.
The unit enters the menu select mode.
9
Select "SYNC REC" by
pressing the or but-
ton and press the MENU
button.
10
Select "ON" by pressing
the or button and
press the MENU button.
" "SYNC" will flash.
" To cancel the operation, press the
11
Begin playback on the stereo system.
Recording will begin automatically.
Notes:
" When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
" If a silence lasts for 3 seconds or more, recording will
be paused (pause function does not work for approxi-
mately 10 seconds after the recording starts). When
the unit receives sound again, recording automatically
starts.
or
" A new track number is created when the recording
resumes.
" Synchronised recording cannot be set with trace-
back recording. Cancel trace-back recording (page
38).
03/3/25 MD_DR470H_UK_5.fm
button.