Table of Contents
Advertisement
PLAYING A DISC
• Every press on B will turn the image clockwise by 90
degrees when an image is displayed. A press on s will
turn the image counterclockwise by 90 degrees.
• If a group is selected, press K or L to select a desired
group, then press B, PLAY or ENTER to select a track.
Slide Show Mode
You can switch to the slide show mode during playback.
1
Press MODE during playback.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
2
Press ENTER.
• The slide show mode will change.
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
3
Press MODE to exit.
Programme (MP3/JPEG)
This feature allows you to programme an MP3 or JPEG disc
to play in a desired sequence.
1
Press MODE (playback must first be stopped).
• The PROGRAM screen will appear.
2
Press K or L to select a track, then press ENTER, to
save it in a programme.
• Press CLEAR/C-RESET to erase the incorrect input.
3
Press PLAY to start programmed playback.
NOTES:
• To erase all tracks in the programme at once, select ALL
CLEAR at the bottom of the list at step
• Press STOP once and then PLAY again, playback will
restart from the beginning of the track at which STOP
was pressed.
• Press STOP twice and then PLAY. Playback starts
from the track in the original order. However, the pro-
gramme can be called back when you follow the above
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.
Random Playback (MP3/JPEG)
1
In stop mode, press MODE repeatedly until the RAN-
DOM screen appears.
2
Press PLAY to play the tracks in random order.
Stereo Sound Mode
1
Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTES:
• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and cannot be changed.
• Stereo sound mode will not be changed when playing
DTS CD.
The VCR/DVD allows you to select a language during DVD
disc (if multi language available) playback.
1
JPEG
2
NOTES:
NOTES (for VR mode only):
MP3
JPEG
2
.
MP3
JPEG
CD
VCD
– 24 –
Audio Language
Press AUDIO during playback.
Press AUDIO repeatedly to select your desired language.
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Audio language selection cannot be made during Rapid
Play. (Refer to page 20.)
• Pressing AUDIO may not work on some DVDs with mul-
tiple audio languages (e.g. DVDs which allow audio lan-
guage setting on the disc menu).
• Pressing AUDIO cycles the sound mode through MAIN,
SUB, MAIN + SUB.
• With discs recorded in VR mode, changing the audio
(MAIN, SUB or MAIN+SUB) is effective only when
using an analogue connection. Although you may be
able to change the settings of the on-screen display, it
will not affect the sound when using a digital connec-
tion.
• DVD-RW discs recorded in double sound (two lan-
guages ) can be played back in either sound mode of
MAIN, SUB or MAIN + SUB.
Mode
AUDIO OUTPUT
L
Main Audio
MAIN
R
Main Audio
L
Sub Audio
SUB
R
Sub Audio
L
Main Audio
MAIN
SUB
R
Sub Audio
DVD
DVD-RW
VR mode
Display on
the TV screen
MAIN
SUB
MAIN+
SUB
EN
Advertisement
Table of Contents
