Table of Contents
Advertisement
PLAYING A DISC
• Every press on B will turn the image clockwise by 90
degrees when an image is displayed. A press on s will
turn the image counterclockwise by 90 degrees.
• If a group is selected, press K or L to select a desired
group, then press B, PLAY or ENTER to select a track.
Slide Show Mode
You can switch to the slide show mode during playback.
1
Press MODE during playback.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
2
Press ENTER.
• The slide show mode will change.
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
3
Press MODE to exit.
Programme (MP3/JPEG)
This feature allows you to programme an MP3 or JPEG disc
to play in a desired sequence.
1
Press MODE (playback must first be stopped).
• The PROGRAM screen will appear.
2
Press K or L to select a track, then press ENTER, to
save it in a programme.
• Press CLEAR/C-RESET to erase the incorrect input.
3
Press PLAY to start programmed playback.
NOTES:
• To erase all tracks in the programme at once, select ALL
CLEAR at the bottom of the list at step
• Press STOP once and then PLAY again, playback will
restart from the beginning of the track at which STOP
was pressed.
• Press STOP twice and then PLAY. Playback starts
from the track in the original order. However, the pro-
gramme can be called back when you follow the above
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.
1
2
JPEG
1
NOTES:
The VCR/DVD allows you to select a language during DVD
MP3
JPEG
disc (if multi language available) playback.
1
2
NOTES:
2
.
NOTES (for VR mode only):
– 25 –
Random Playback (MP3/JPEG)
In stop mode, press MODE repeatedly until the RAN-
DOM screen appears.
Press PLAY to play the tracks in random order.
Stereo Sound Mode
Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and cannot be changed.
• Stereo sound mode will not be changed when playing
DTS CD.
Audio Language
Press AUDIO during playback.
Press AUDIO repeatedly to select your desired language.
• The sound mode cannot be changed during playback of
discs not recorded in double sound.
• Audio language selection cannot be made during Rapid
Play. (Refer to page 21.)
• Pressing AUDIO may not work on some DVDs with mul-
tiple audio languages (e.g. DVDs which allow audio lan-
guage setting on the disc menu).
• Pressing AUDIO cycles the sound mode through MAIN,
SUB, MAIN + SUB.
• DVD-RW discs recorded in double sound (two lan-
guages ) can be played back in either sound mode of
MAIN, SUB or MAIN + SUB.
• With discs recorded in VR mode, changing the audio
(MAIN, SUB or MAIN+SUB) is effective only when
using an analogue connection. Although you may be
able to change the settings of the on-screen display, it
will not affect the sound when using a digital connec-
tion.
Mode
AUDIO OUTPUT
L
Main Audio
MAIN
R
Main Audio
L
Sub Audio
SUB
R
Sub Audio
L
Main Audio
MAIN
SUB
R
Sub Audio
MP3
JPEG
CD
VCD
DVD
DVD-RW
VR mode
Display on
the TV screen
MAIN
SUB
MAIN+
SUB
EN
Advertisement
Table of Contents
