Advertisement
About Copier Mode/Fax Mode
You can change between copier mode and fax mode. To change modes, press the COPY/FAX key.
COPY indicator
COPY/FAX key
The function of some operation panel keys and indicators depends on the mode selected. For detailed information, see manual
for the function you are using.
[Copier mode]
: You can use the copier function.
: You can use the printer function.
When the following functions are in use, pressing the COPY/FAX key causes the unit to change modes after the operation in
progress is finished. The indicator for the current mode remains lit, and the indicator for the new mode will blink until the
operation is complete.
Copying
Scanning documents for memory sending
Direct sending
When the unit is in the following conditions, you cannot change between copier mode and fax mode.
A paper or original misfeed has occurred.
Paper has run out during copying and the unit is stopped.
Setting of the tray paper size or toner save mode, etc. is in progress in copier mode.
Interrupt copying is being performed in copier mode.
Setting of a user program in copier or fax mode is in progress.
Information (group dialing or program dialing information, etc.) is being entered in fax mode.
The front or side cover is open.
FAX indicator
[COPY/FAX key]
In copier mode:
COPY indicator lights up
In fax mode:
FAX indicator lights up
2
MULTI ACCESS
[Fax mode]
: You can use the fax function.
Advertisement
