Advertisement
Printing data during copying
Print data is received, but cannot be printed right away, because copying has priority. When copying is finished the print
data is printed under any of the following conditions.
You press the CLEAR ALL key
The auto clear time elapses (when set *)
60 seconds elapses (when the auto clear time is not set *)
Normal fax reception during copying
Faxes are automatically received with substitute reception during copying. When copying is finished the
faxes printed under any of the following conditions.
You press the CLEAR ALL key
The auto clear time elapses (when set *)
60 seconds elapses (when the auto clear time is not set *)
Printing received data during copying
Received data cannot be printed right away, because copying has priority. When copying is finished the received data
is printed under any of the following conditions.
You press the CLEAR ALL key
The auto clear time elapses (when set *)
60 seconds elapses (when the auto clear time is not set *)
Receiving a telephone call during copying
You can receive a telephone call during copying. If the telephone call is a fax transmission you can interrupt the copy job
to receive the fax. To interrupt the copy job to receive a fax, perform the following steps.
Press the CLEAR ALL key or the CLEAR key to interrupt copying.
1
If there are documents in the single pass feeder or on the original table, remove them.
2
Press the COPY/FAX key to select fax mode.
3
Press the START key.
4
Receving begins.
Performing a copy job during printing
When using copier mode or when selecting copier mode from fax mode, you can peform a copying job.
Pending print data is held and after copying is finished, printing resumes. To interrupt the print job to copy, perform the
following steps.
Confirm that copier mode is selected.
1
(If the unit is in fax mode, press the COPY/FAX key)
Make copier settings and press the START key.
2
When the page currently being printed is finished, copying begins.
After copying is finished, printing resumes under any of the following conditions.
3
You press the CLEAR ALL key
The auto clear time elapses (when set *)
60 seconds elapses (when the auto clear time is not set *)
* For information about setting the auto clear function, see the "User Programs" section of the copier operation manual.
4
MULTI ACCESS
Advertisement
