Other Restrictions - Sharp Multi Access Operation Manual

Multi-Access Operation
8) Direct transmission while the line is being used
If you perform a direct transmission while the line is being used, the job is stored. The display shows
"Line is busy. Direct transmission will start after finishing."
a) Other combinations
a-1 Can be used after you change to the mode you wish to use.
a-2 A connected telephone can be used.
a-3 Faxes are received to memory.
a-4 Can be used when the display of the mode to be used appears.
a-5 Can be used when the display of fax mode appears. A connected phone can be used regard-
less of the mode.
a-6 Faxes can be sent or received over the line being used for a voice call.
a-7 The speed of transfer falls during scanning of an original.

Other restrictions

G
A print job or fax print job cannot be executed while the tray paper size is being set. The job begins
when the tray paper size setting is completed.
G
If you receive a fax while setting the tray paper size, the fax is automatically received to memory.
The fax is printed when the setting is completed.
G
The tray paper size cannot be set during a print job or fax print job.
Printing with the multi-bypass tray
In the following cases, load or reload paper in the bypass tray.
G
When the print job is set to print from the multi-bypass tray.
G
When a message appears prompting you to load or reload paper in the bypass tray.
10