Sharp Multi Access Operation Manual page 4

Modes and the display
The display shows the base screen or function setting screen of the currently selected mode. During
operation, or during the execution of a walkup job, the display of the corresponding mode appears.
When there is no walkup job, or during the execution of a print or fax print job, the display shows
"PRINTING". If any key is pressed, this display changes to the display of the currently selected mode.
Modes and data status lights
There are data status lights above the PRINT, SCAN, and FAX keys. These light and blink to indi-
cate the status of data.
Print mode
Online light
Data light
Scan mode
Data light
Fax mode
Sending light
Data light
Modes and key operator programs
The key operator programs are used to program settings that are necessary or useful for functions.
The programs can be accessed from any mode (copy, fax, print, or scan). When the setting is com-
pleted, the machine returns to the original mode.
To access the key operator programs, press the FUNCTION key. Information on the programs is
contained in the operation manuals for each of the modes.
Illuminates steadily
Online
Data in memory
Illuminates steadily
Data in memory
Illuminates steadily
Line in use
Fax transmission job in fax mem-
ory
Blinks
Offline
Processing data or printing
Blinks
Sending
Blinks
-
Received fax in fax memory, or
transmission job in memory.
Multi-Access
3