Connecting The Telephone Line Cord - Sharp AM-400 Online Manual

Installation

Connecting the telephone line cord

Insert one end of the telephone line cord into the adapter. Insert the other end
of the line cord into the socket on the back of the machine marked TEL. LINE.
Plug the adapter into the telephone socket on the wall.
Insert the line cord in the TEL LINE
socket, not the TEL. SET socket!
Setting the dial mode:
The machine is set for tone dialling. If you are on a pulse dial line, you must
set the fax machine for pulse dialling. Press the panel keys as follows:
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Select the dial mode:
TONE:
5
Press
14
) and then press
.
.
PULSE:
repeatedly to exit.
MENU
.
Display:
FAX SETTING
1: DATE&TIME SET
1:TONE
The display briefly shows
your selection, then:
4: RINGER VOLUME