Epson 1200 series User Manual page 141

Document is not
positioned correctly.
Unsharp Mask is
selected.
Image size setting is
unsuitable.
Colors differs from the original or look strange.
Cause
Screen is not calibrated.
Image Type and
Destination settings are
incorrect.
Opening on the
document table is
covered, or Film Adapter
was not closed during
scanning.
Normal scanning.
Move or angle the document slightly.
Clear the check from the Unsharp
Mask check box in EPSON TWAIN.
Change the image size smaller
slightly.
What to do
Calibrate the screen. See Chapter 3.
Make sure the Image Type (page 4-12)
and Destination settings (page 4-13)
are correct.
When using the Film Adapter, make
sure the opening near the hinges on
the document table is uncovered, or
the Film Adapter is closed when
scanning.
Printed colors will not exactly match
the colors on your monitor, since
printers and monitors use different
color systems: monitors use RGB (red,
green, and blue), while printers
typically use CMYK (cyan, magenta,
yellow, and black).
Maintenance and Troubleshooting
7
7-17