Power-On Sequence - Epson 1200 series User Manual

Power-on sequence

Keep the following in mind every time you turn on your computer
and SCSI devices, including the scanner.
Be sure to turn on the SCSI device which is connected at the
farthest end of the daisy chain first, then the second farthest
and so on, until finally your computer. If you attempt to use
a SCSI device which has been turned on after the computer,
it may not work properly, or the computer may not work
properly.
For Windows 95 or 98 users:
The first time you turn on the computer after turning on the
scanner, one of the following dialog boxes may appear.
If you see one of these, follow the installation instructions in
Chapter 3, then see "Power-off sequence" following.
Windows 95
Windows 98
Setting Up the Scanner
2
2-15