Turning The Scanner On And Off - Epson GT-15000 User Manual

Turning the Scanner On and Off

Follow these steps to turn on the scanner:
1. Pull up the transportation lock on the back of
the scanner to the
2. Before you plug in the scanner, make sure it is
turned off (the . Power button is not pushed
in).
3. Plug one end of the scanner's power cord into
the AC inlet at the back of the scanner, and the
other end into a grounded electrical outlet.
4. Press the . Power button on the front
of the scanner to turn it on.
The green
Ready
5. Wait until the
Ready
flashing, then press the . Power
button again to turn it off.
Now see the next section to connect the
scanner to your computer, and then install
the software as described on page 16.
position.
Unlock
light starts flashing.
light stops
Ready light
. Power button
Transportation lock
13
Getting Started