Dell Multi Ups Management Console Settings; Discover The Nodes Connected On The Network - Dell PowerEdge UPS 500T User Manual

3.2. DELL MULTI UPS MANAGEMENT CONSOLE SETTINGS

Start the "Dell Multi UPS Management Console" main graphical interface from the previously created
shortcut, and then click on the Settings menu item.

3.2.1. DISCOVER THE NODES CONNECTED ON THE NETWORK

From the Settings Æ Auto Discovery item, the following discovery methods are available:
x
Quick Scan (automatically performed when application starts)
x
Range Scan
x
Address Scan
Notes:
x
The Quick scan request is a Broadcast frame on 4679 IANA reserved port and 69 standard
TFTP port.
Using the Quick scan operation, you will discover through broadcast within a few seconds:
Network Management Cards H910P,
x
For the other nodes, please perform the discovery based on IP address ranges (Range scan)
Using the Range Scan operation you will discover the nodes that are outside of the Network
segment and nodes that are not compatible with the "Quick scan" feature.
x
Address Scan performs a single address scan
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
USER GUIDE
Dell.com
6