Microsoft; Enabling The Virtualization Module; Vmware Supervisors Prerequisites; Microsoft Supervisors Prerequisites - Dell PowerEdge UPS 500T User Manual

7.3.2. MICROSOFT

x
SCVMM on Windows Server 2008 R2
x
Windows Server 2008 R2 with DELL UPS Local Node Manager

7.4. ENABLING THE VIRTUALIZATION MODULE

To enable the virtualization module you must go to the "System" > "Module Settings" panel and
enable it as shown in the following screenshot:

7.5. VMWARE SUPERVISORS PREREQUISITES

The virtualization module requires the following prerequisites:
x
VMware vCenter and vSphere Client installed.
Note that vCenter and DELL MUMC could be installed on the same server.
x
The vSphere SDK for Perl installed on the same machine as DELL MUMC.
The vSphere SDK for Perl can be downloaded on the VMware website.
http://www.vmware.com/support/developer/viperltoolkit/
You must also have a knowledge / experience with DELL MUMC software and VMware Infrastructure.

7.6. MICROSOFT SUPERVISORS PREREQUISITES

The virtualization module needs following prerequisites:
x
The Powershell Snapin for SCVMM. To get it, either
Î Install the VMM console on the machine hosting Dell Multi UPS Management Console
Î Or install Dell Multi UPS Management Console on the machine hosting SCVMM.
x
The server hosting Dell Multi UPS Management Console must be on the same Windows
Domain than SCVMM Server
x
The server hosting Dell Multi UPS Management Console must enable the execution of third
party scripts on the local machine (minimum access "Remote Signed") (examples: Set
ExecutionPolicy RemoteSigned).
x
The next screenshot displays the parameters after the configuration example.
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
USER GUIDE
Dell.com
39