Dell PowerEdge UPS 500T User Manual page 7

Step 2 (Configuration)
When started, the application automatically performs a Quick scan:
x
Using the Quick scan operation, you will discover, through broadcast, within a few seconds,
all Dell UPS Management Card or Dell Local Node Manager available.
x
The discovered nodes are displayed in Settings
For the other nodes, please perform the discovery based on IP address ranges (Range scan)
x
Using the Range Scan operation you will discover the nodes that are outside of the Network
segment and nodes that are not compatible with the "Quick scan" feature.
x
Refer to the Compatibility list to determine if your node supports "Quick scan" feature.
[Optional]
x In Settings Æ System Æ Module Settings, activate the shutdown module
x Then in the Settings Æ Shutdown page, assign the IP address of the UPS that powers the
local Computer.
x In the Settings Æ User List page, assign the access rights through "login and password"
Step 3 (Operation)
The Views Æ Node List menu item allows you to supervise the current state of the compatible power
devices & applications (select a line in the list and the panels are updated with selected device
information)
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
Æ
Auto Discovery
USER GUIDE
Dell.com
3