HP Surestore 330fx - Optical Jukebox Manual page 10

a. Place the power supply on the power supply bracket. Make sure all cables are out of the
way.
b. Mount the new power supply with 2 T-20 screws through mount tabs on the top of the
power supply.
5. Install the new SCSI interface module.
Note
The new interface module you will assemble has 2 SCSI
interface PCAs to support future upgrades to the number of
drives (upgrading to 8, 10, or 12 drives).
Figure 6: Location of the interface module and mounting screws
a. Remove the current interface module.
1. Disconnect the cables from the module.
2. Remove the 4 T-20 mounting screws and rotate the module down.
3. Remove all cables from the interface PCA.
a. Remove the SCSI interface PCA from the module by removing the 6 T-15 mounting screws.
10