HP Surestore 330fx - Optical Jukebox Manual page 17

.
Figure 15: Connecting the drive fan cables to the lower interposer PCA
8. Download the latest code to the controller PCA and drives.
You will use an external SCSI connector on the interface module.
9. Run the Wellness Test to verify installation.
10. Remove power from the jukebox.
11. Label the jukebox (see the following Note for guidance on which label to use).
a. Place the appropriate product upgrade label over the previous lable as shown in Figure 16. Use
a drive-upgrade-based or capacity-upgrade-based label as explained in the following Note. Do
not cover the serial number.
The label is located on the bottom ledge of the jukebox, under the interface module enclosure.
Figure 16: Positioning the upgrade label on the old label
17