Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.
• If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service technicians from injury.
1. Use product-specific ESD procedures when they exceed the requirements noted here. 2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. •...
Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese Chapter 1 Safety information...
Page 24
• French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
– “FRU identification for CTO, CMV, and GAV products” on page 27 Important: Advise customers to contact the Lenovo Customer Support Center if they need any assistance in obtaining or installing any software fixes, drivers, and UEFI BIOS downloads. Telephone numbers for Lenovo Support are available at:http://www.lenovo.com/support/phone...
MT and 3-digit model, where model = “CTO” (Example: 1829-CTO). Custom Model Variant (CMV) This is a unique configuration that has been negotiated between IBM or Lenovo and the customer. A unique 4-digit MT and 3-digit model is provided to the customer to place orders (Example: 1829-W15). A CMV is a special bid offering.
= a “fixed part number”, not “CTO” (Example: 1829-F1U). • PEW can be accessed at the following Web site: http://www.lenovo.com/support/site.wss/document.do?lndocid=LOOK-WARNTY Select Warranty lookup. Input the MT and the Serial number and the list of key commodities will be returned in the PEW record under COMPONENT INFORMATION.
“What to do first” on page 29 • “Checkout guide” on page 30 – “Diagnostics using PC-Doctor for Dos” on page 30 – “Lenovo ThinkVantage Toolbox (Lenovo System Toolbox)” on page 33 – “PC-Doctor for Windows” on page 33 – “FRU tests” on page 33 •...
PC-Doctor. Note: PC-Doctor for DOS is available at the following Web site: http://www.lenovo.com/support To create the PC-Doctor diagnostic CD, follow the instructions on the Web site. For some possible configurations of the computer, PC-Doctor might not run correctly. To avoid this problem, you need to initialize the computer setup by use of the BIOS Setup Utility before you run PC-Doctor.
Configuration utility for DOS. The utility is available on the following Web site: http://www.lenovo.com/support PC-Doctor cannot be used to test a device that is in the docking station, even if the computer supports the docking station.
Page 38
Diagnostics Interactive Tests • Run Normal Test • Keyboard • Run Quick Test • Video • CPU/Coprocessor • Internal Speaker • Systemboard • Mouse • Video Adapter • Diskette • Fixed Disks • System Load • Diskette Drives • Optical Drive Test •...
You can also run this program as either of the following: • Click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ System Health and Diagnostics. • Click Start ➙ Control Panel ➙ System and Security ➙ Lenovo's System Health and Diagnostics. Windows Vista and Windows XP: Click Start ➙...
Page 40
Table 1. FRU tests Applicable test System board 1. Diagnostics ➙ CPU/Coprocessor. 2. Diagnostics ➙ Systemboard. 3. If the docking station or the port replicator is attached to the ThinkPad Notebook, detach it. 4. Place the computer on a horizontal surface, and run Diagnostics ➙ ThinkPad Devices ➙...
Table 1. FRU tests (continued) Applicable test TrackPoint or pointing If the TrackPoint does not work, check the configuration as specified in the BIOS Setup device Utility. If the Trackpoint is disabled, select Automatic to enable it. After you use the TrackPoint, the pointer may drift on the screen for a short time. This drift can occur when a slight, steady pressure is applied to the TrackPoint pointer.
Note: Output voltage of pin no.2 of the ac adapter may different from the one you are servicing. 3. If the voltage is not correct, replace the ac adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. •...
Checking the backup battery Do the following: 1. Power off the computer, and unplug the ac adapter from it. 2. Turn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack” on page 68). 4. Remove the backup battery (see “1100 Backup battery” on page 82). 5.
“Symptom-to-FRU index” on page 44 Service Web site: When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.com/spm Restoring the factory contents by using Product Recovery discs When the hard disk drive (HDD) or solid state drive (SSD) is replaced because of a failure, no Product Recovery program is on the new drive.
Page 46
The recovery disc set consists of the user instructions and the following set of DVDs to restore the computer to the original factory configuration. ® Operating System Recovery Disc (one disc) This disc restores the Microsoft Windows operating system. Use this disc to start the recovery process. Applications and Drivers Recovery Disc (one or This disc restores the preinstalled applications and more discs)
Attention: If the user HDP has been forgotten, check whether a master HDP has been set. If it has, it can be used for access to the hard disk drive. If no master HDP is available, neither Lenovo nor Lenovo authorized service technicians provide any services to reset either the user or the master HDP, or to recover data from the hard disk drive.
Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the service technician, neither Lenovo nor Lenovo authorized service technicians provide any services to reset the user HDPs or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee.
Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. To put the computer into screen blank mode, do as follows: 1. Press Fn+F3. A panel for selecting a power plan (in Windows XP, power scheme) appears. 2.
Note: If the computer enters the hibernation mode while it is docked to the ThinkPad Advanced Dock or ThinkPad Advanced Mini Dock, do not undock it before resuming normal operation. If you do undock it and then try to resume normal operation, you will get an error message, and you will have to restart the system. To cause the computer to enter hibernation mode, do any of the following: •...
Note: For a device not supported by diagnostic codes in the ThinkPad Notebooks, see the manual for that device. Numeric error codes Table 2. Numeric error codes Symptom or error FRU or action, in sequence 0175 System board. Bad CRC1, stop POST task—The EEPROM checksum is not correct.
Page 52
Table 2. Numeric error codes (continued) FRU or action, in sequence Symptom or error 0196 1. Enter BIOS Setup Utility by entering supervisor Security hardware removed password, and select Password ➙ Security Chip ➙ Clear Security Chip to clear this error. 2.
Page 53
Table 2. Numeric error codes (continued) FRU or action, in sequence Symptom or error 0260 1. Charge the backup battery for more than 8 hours by System timer error. connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
Page 54
Inform the following information to the customer: If in the Warning: Your internal hard disk drive (HDD) may not primary bay the customer is using a non-IBM or non-Lenovo function correctly on this system. Ensure that your hard disk drive (HDD), or an old generation IBM HDD which...
Table 2. Numeric error codes (continued) FRU or action, in sequence Symptom or error 2110 1. Reseat the hard disk drive. Read error on HDD0 (Main hard disk drive) 2. Main hard disk drive. 3. System board. 2112 1. Reseat the hard disk drive. Read error on HDD1 (Ultrabay hard disk drive) 2.
If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty. However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and it should be replaced.
• This policy applies to all ThinkPad Notebooks purchased on 1 January, 2008 or later. • Lenovo will not provide replacement if the LCD is within specification as we cannot guarantee that any replacement LCD will have zero pixel defects.
Page 58
i. PC Cards 4. Turn on the computer. 5. Determine whether the problem has been solved. 6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. 7. If the problem remains, replace the following FRUs one at a time (do not replace a nondefective FRU): a.
2. During the startup, when a prompt to press Ctrl+I to enter the Configuration Utility is displayed on the screen, press and hold the Ctrl key, and press the I key. 3. The screen for Intel Matrix Storage Manager option ROM is displayed. Select “Create RAID Volume” and press Enter.
Page 62
Table 7. Status indicators (continued) Indicator Meaning Bluetooth wireless Green: The Bluetooth wireless feature or Wireless USB feature is on, and the or Wireless USB radio link is ready for use. status Blinking Data is being transmitted. green: Wireless WiMAX Green: The WiMAX feature is on, and the radio link is ready for use.
Page 63
Table 7. Status indicators (continued) Indicator Meaning Sleep (standby) Green: The computer is in sleep (standby) mode. status Blinking The computer is entering sleep (standby) mode or hibernation mode, green: or is resuming normal operation. Serial Ultrabay Green: An Serial Ultrabay Enhanced device is installed and in use. Enhanced status Blinking only for W700 and...
Page 66
Table 8. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme directly, with no need to start Presentation Director. To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Director, and change the settings. Note: If the computer is a Windows 7 model, it does not support presentation schemes, but the Fn+F7 combination is available for switching a display output location.
Page 67
Table 8. Fn key combinations (continued) Key combination Description ® Fn+PgUp Turn the ThinkLight on or off. Note: This function is supported only on the ThinkPad computers that have the ThinkLight. The on or off status of the ThinkLight is shown on the screen for a few seconds when you press Fn+PgUp.
If you replace the system board, you must restore the serial number of the system unit to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer.
When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already exists, it is not overwritten.
(ESD) strap (P/N 6405959). Important notice for servicing ThinkPad W700ds and W701ds The computer display is designed to be opened and used at an angle slightly greater than 90 degrees. Do not open the main display beyond 150 degrees.
Important notice for replacing a battery pack: ThinkVantage Toolbox (in Windows 7) and Lenovo System Toolbox (in Windows Vista and Windows XP) have an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective.
If ThinkVantage Toolbox or Lenovo System Toolbox is not installed in the computer, the customer should download this program before a non-physically damaged battery pack is replaced. Note that a physically damaged battery pack is non-warranty replacement. DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.
1030 Serial Ultrabay Enhanced device Notes: You can install either a Serial Ultrabay Enhanced device or a Serial Ultrabay Slim device in the Serial Ultrabay Enhanced bay. The Serial Ultrabay Enhanced bay does not accept any of the following devices: ™...
Page 77
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, have the user make a backup copy of all the information on it if possible. •...
Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage converter (continued) Note: Mounted number of the hard disk drive depends on the models. In models with RAID features, two hard disk drives that have same FRU no. must be used in slot 0 ( ) and in slot 1 ( When installing: Make sure that the HDD connector or SSD connector is attached firmly.
Page 79
• “1010 Battery pack” on page 68 Table 13. Removal steps of DIMM slot cover and DIMM Note: Loosen the screws , but do not remove them. For ThinkPad W700 and W700ds: Chapter 9 Removing and replacing a FRU...
Page 80
Table 13. Removal steps of DIMM slot cover and DIMM (continued) Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 ( ), but not in SLOT-1 ( When installing:Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place.
Table 13. Removal steps of DIMM slot cover and DIMM (continued) When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily. Note: If only one DIMM is used on the computer you are servicing, the card must be installed in the lower slot of the slots under the keyboard.
Page 82
Table 14. Removal steps of palm rest (continued) When installing: When you attach the palm rest, do as follows: ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 83
Table 15. Installation of the palm rest 1. Attach the color sensor connector and the fingerprint reader connector firmly to the system board. Some models have only the fingerprint reader connector. 2. Attach the palm rest as shown in this figure. Chapter 9 Removing and replacing a FRU...
Table 15. Installation of the palm rest (continued) 3. Push the front side of the palm rest and the areas marked until it clicks into place. 4. Close the LCD cover and turn the computer over. Then fasten the four screws to secure the palm rest. 1070 Digitizer pen case assembly For access, remove these FRUs in order: •...
Table 16. Removal steps of digitizer pen case assembly Step Screw (quantity) Color Torque 0.181 Nm M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver (1.85 kgfcm) 1080 Bluetooth daughter card (BDC-2.1) for W701 and W701ds For access, remove these FRUs in order: •...
Table 17. Removal steps of BDC-2.1 for W701 and W701ds Step Screw (quantity) Color Torque 0.392 Nm M2.5 × 5 mm, wafer-head, nylon-coated (1) Silver (4 kgfcm) When installing: Make sure that connector is attached firmly. 1090 Keyboard For access, remove these FRUs in order: •...
Table 18. Removal steps of keyboard (continued) Step Icon Screw (quantity) Color Torque M2 × 17 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Lift the keyboard a little in the direction shown by arrow , and then detach the connector When installing: Make sure that the keyboard edges are under the frame as shown in this figure.
1100 Backup battery DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Table 19. Removal steps of backup battery (continued) For ThinkPad W701 and W701ds: When installing: Make sure that the battery connector is attached firmly. 1110 Numeric keypad For access, remove these FRUs in order: • “1010 Battery pack” on page 68 •...
Page 90
Table 20. Removal steps of numeric keypad Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) Slide the keypad a little in the direction shown by arrow ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 91
Table 20. Removal steps of numeric keypad (continued) When installing: Make sure that the keypad edges are under the frame as shown in this figure. Chapter 9 Removing and replacing a FRU...
Table 20. Removal steps of numeric keypad (continued) Note: For ThinkPad W701 and W701ds, make sure that the cable is under the frame as shown in this figure. 1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds For access, remove this FRU: •...
Page 93
Table 21. Removal steps of DIMM slot cover and DIMM under keyboard Note: Loosen the screw , but do not remove it. Chapter 9 Removing and replacing a FRU...
Table 21. Removal steps of DIMM slot cover and DIMM under keyboard (continued) Note: If only one DIMM is used on the computer you are servicing, the card must be installed in the lower slot. When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place.
Page 95
Table 22. Removal steps of keyboard bezel for W700 and W700ds (continued) When installing: Make sure that all the claws are attached firmly. When installing: Make sure that the connector cable is routed as shown in this figure. Chapter 9 Removing and replacing a FRU...
Page 96
Table 23. Removal steps of speaker assembly for W700 and W700ds Step Screw (quantity) Color Torque M2 × 3.5 mm, small-head, nylon-coated (3) Silver 0.181 Nm (1.85 kgfcm) Table 24. Removal steps of keyboard bezel for W701 and W701ds For ThinkPad W701 and W701ds: Torque Step Screw (quantity)
Page 97
Table 24. Removal steps of keyboard bezel for W701 and W701ds (continued) Note: Loosen the screws , but do not remove them. Chapter 9 Removing and replacing a FRU...
Page 98
Table 24. Removal steps of keyboard bezel for W701 and W701ds (continued) When installing: Make sure that all the claws are attached firmly. When installing: Make sure that the connector cable is routed as shown in this figure. Table 25. Removal steps of speaker assembly for W701 and W701ds Step Screw (quantity) Color...
Table 25. Removal steps of speaker assembly for W701 and W701ds (continued) 0.181 Nm M2 × 3.5 mm, small-head, nylon-coated (3) Silver (1.85 kgfcm) 1140 Wireless USB adapter or Intel Turbo Memory Minicard Note: If the Intel Turbo Memory Minicard is installed in the half-size PCI Express Mini Card slot as shown in “1140 Wireless USB adapter or Intel Turbo Memory Minicard”...
Table 26. Removal steps of Wireless USB adapter or Intel Turbo Memory Minicard (continued) Step Screw (quantity) Color Torque 0.181 Nm M2 × 3 mm, thin-head, nylon-coated (2) Silver (1.85 kgfcm) 1150 PCI Express Mini Card for wireless LAN/WiMAX For access, remove these FRUs in order: •...
Page 101
• “1060 Palm rest or palm rest with fingerprint reader” on page 75 • “1090 Keyboard” on page 80 • “1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds” on page 86 • “1130 Keyboard bezel and speaker assembly” on page 88 Table 27.
Page 102
Table 27. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX for W700 and W700ds (continued) When installing: • In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN, and the black cable into the jack labeled AUX on the card. If the computer you are servicing has three cables, put the white cable in the cable holder and place it under the card.
Table 28. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX for ThinkPad W701 and W701ds (continued) When installing: • In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN, and the black cable into the jack labeled AUX on the card.
Table 29. Removal steps of Intel Turbo Memory Minicard Step Screw (quantity) Color Torque M2 × 3 mm, thin-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) 1170 CPU thermal device/fan For access, remove these FRUs in order: • “1010 Battery pack” on page 68 ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 105
• “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter” on page 70 • “1060 Palm rest or palm rest with fingerprint reader” on page 75 • “1090 Keyboard” on page 80 •...
Page 106
Table 30. Removal steps of CPU thermal device/fan for W700 and W700ds (continued) Table 31. Installation of the CPU thermal device/fan for W700 and W700ds When installing: • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked as in the following figure.
Page 107
Table 32. Removal steps of CPU thermal device/fan for W701 and W701ds For ThinkPad W701 and W701ds: Note: Loosen the screws , and , but do not remove them. When you attach the fan, secure the screws in order as shown in this figure. Attention: Do not handle the fan roughly.
Table 33. Installation of the CPU thermal device/fan for W701 and W701ds When installing: • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component.
Page 109
Table 34. Removal steps of VGA thermal device/fan (continued) For ThinkPad W700ds and W701ds: Attention: Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and imperfect contact with components. Chapter 9 Removing and replacing a FRU...
Page 110
Table 34. Removal steps of VGA thermal device/fan (continued) Table 35. Installation of the VGA thermal device/fan in ThinkPad W700 and W700ds When installing: • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked as in the following figure.
Table 36. Installation of the VGA thermal device/fan and thermal putty in ThinkPad W701 and W701ds When installing: • Before you attach the fan assembly to the computer, attach new thermal putty on the video card as shown as this figure. •...
Table 37. Removal steps of CPU Rotate the head of the screw in the direction shown by arrow to release the lock; then remove the CPU When installing: Place the CPU on the CPU socket , and then rotate the head of the screw in the direction shown by arrow to secure the CPU.
Page 113
• “1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds” on page 86 • “1130 Keyboard bezel and speaker assembly” on page 88 Table 38. Removal steps of video card Torque Step Screw (quantity) Color M2 × 3.5 mm, shoulder type, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm)
Table 38. Removal steps of video card (continued) 1210 HDD I/O sub card For access, remove these FRUs in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Page 115
Table 39. Removal steps of HDD I/O sub card for W700 and W700ds (continued) 0.181 Nm M2 × 3.5 mm, small-head, nylon-coated (2) Silver (1.85 kgfcm) M2.5 × 5 mm, wafer-head, nylon-coated (1) Silver 0.392 Nm (4 kgfcm) For models with 34-mm ExpressCard/Smart Card slot: Step Screw (quantity) Color...
Page 116
Table 39. Removal steps of HDD I/O sub card for W700 and W700ds (continued) Step Screw (quantity) Color Torque 0.181 Nm M2 × 3.5 mm, small-head, nylon-coated (4) Silver (1.85 kgfcm) 0.392 Nm M2.5 × 5 mm, wafer-head, nylon-coated (1) Silver (4 kgfcm) Table 40.
Page 117
Table 40. Removal steps of HDD I/O sub card for W701 and W701ds (continued) Step Screw (quantity) Color Torque 0.181 Nm M2 × 14 mm, small-head, nylon-coated (2) Silver (1.85 kgfcm) 0.181 Nm M2 × 3.5 mm, small-head, nylon-coated (1) Silver (1.85 kgfcm) M2.5 ×...
Page 118
Table 40. Removal steps of HDD I/O sub card for W701 and W701ds (continued) Torque Step Screw (quantity) Color M2 × 14 mm, small-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) M2 × 3.5 mm, small-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) 0.392 Nm M2.5 ×...
1220 LCD unit and LCD cable cap For access, remove these FRUs in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Page 120
M2 × 10 mm, wafer-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) Step is only for ThinkPad W700ds. When installing: In ThinkPad W700ds, make sure that the cable connector is attached firmly. ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 121
Table 41. Removal steps of LCD unit for W700 and W700ds (continued) When installing: 1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Page 122
Table 42. Removal steps of LCD unit for W701 and W701ds (continued) Torque Step Screw cap Screw (quantity) Color — M2.5 × 9 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) M2.5 × 9 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) Torque...
Page 123
Table 42. Removal steps of LCD unit for W701 and W701ds (continued) Step Screw (quantity) Color Torque M2.5 × 9 mm, wafer-head, nylon-coated (4) Black 0.392 Nm (4 kgfcm) Black 0.181 Nm M2 × 12 mm, wafer-head, nylon-coated (2) (1.85 kgfcm) Step is only for ThinkPad W701ds.
Table 42. Removal steps of LCD unit for W701 and W701ds (continued) When installing: 1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Page 126
Table 43. Removal steps of structure frame (continued) When installing: Make sure that the connector is attached firmly, and that the cable is routed as in the figure above. Note: Step is only for ThinkPad W700 and W700ds. Torque Step Screw (quantity) Color M2 ×...
1240 ODD switch sub card for W700 and W700ds For access, remove these FRUs, in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
1250 Audio and card reader I/O card For access, remove these FRUs, in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Table 45. Removal steps of audio and card reader I/O card (continued) When installing: Make sure the connector is attached firmly. 1260 System board and base cover Note: When you replace following system boards, you also need to replace FRUs listed in the following table. 42W8199 System board for MXM-support, with TPM for W700 42W8201...
Page 130
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. After replacing the system board, run PC-Doctor for DOS to make sure that HDD Active Protection still functions.
Page 131
ICH (I/O Controller Hub) Upper side of the system board: Bottom side of the system board: Following components soldered on the top side of the system board are extremely sensitive. When you service the system board, avoid any kind of rough handling. For ThinkPad W701 and W701ds: PCH (Platform Controller Hub) Video sub card (Mobile PCI Express Module)
Page 132
Upper side of the system board: Bottom side of the system board: ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 133
Table 46. Removal steps of system board and base cover Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (3) Silver 0.181 Nm (1.85 kgfcm) Note: Step is only for W700 and W700ds. Turn the system board over, and then disconnect the PC Card/ExpressCard slots assembly or PC Card/Smart Card slots assembly from the system board.
Page 134
Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: Product label Homologation label Following labels need to be peeled off from the old base cover, and need to be put on the new base cover. Serial number label Wireless LAN LMA label Windows license label (COA)
For the location of each label, refer the following figure: For ThinkPad W701 and W701ds: 2010 LCD front bezel (LCD cover kit) For access, remove this FRU: • “1010 Battery pack” on page 68 Table 47. Removal steps of LCD front bezel Step Screw cap Screw (quantity)
Table 47. Removal steps of LCD front bezel (continued) Close the LCD cover. Detach the LCD rear cover a little as shown in step of this figure, and detach the rear edge of the LCD rear cover 2020 Inverter card For access, remove these FRUs in order: •...
Page 137
Table 48. Removal steps of inverter card for W700 and W700ds (continued) Torque Step Screw (quantity) Color M2 × 3.5 mm, wafer-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) When installing: In some models, Make sure that connector that has pink cable and white cable and the connector that has blue cable and white cable are attached firmly.
Table 49. Removal steps of inverter card for W701 and W701ds (continued) Torque Step Screw (quantity) Color M2 × 3 mm, wafer-head, nylon-coated (3) Black 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connectors are attached firmly. 2030 Integrated camera For access, remove these FRUs in order: •...
Page 139
Table 50. Removal steps of integrated camera When installing: Make sure that the connector is attached firmly. Torque Step Screw (quantity) Color M2 × 3.5 mm, thin-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) Chapter 9 Removing and replacing a FRU...
2040 Bluetooth daughter card (BDC-2.1) for W700 and W700ds For access, remove these FRUs in order: • “1010 Battery pack” on page 68 • “2010 LCD front bezel (LCD cover kit)” on page 129 Table 51. Removal steps of BDC-2.1 Step Screw (quantity) Color...
Page 141
• “2040 Bluetooth daughter card (BDC-2.1) for W700 and W700ds” on page 134 Table 52. Removal steps of LCD panel, hinges, and LCD cable Step is only for ThinkPad W700 and W700ds. Chapter 9 Removing and replacing a FRU...
Page 142
For ThinkPad W700 and W701 M2.5 × 5 mm, wafer-head, nylon-coated (4) Silver 0.392 Nm (4 kgfcm) For ThinkPad W700ds and W701ds M2.5 × 7 mm, wafer-head, nylon-coated (4) Black 0.392 Nm (4 kgfcm) When installing: Make sure that the connector is attached firmly.
Page 143
Color Torque Black 0.181 Nm M2 × 3 mm, wafer-head, nylon-coated (6) (1.85 kgfcm) For ThinkPad W700 and W701, skip steps from For ThinkPad W700ds and W701ds: Torque Step Screw (quantity) Color M2.5 × 7 mm, wafer-head, nylon-coated (5) Black 0.392 Nm...
M2 × 3 mm, wafer-head, nylon-coated (6) (1.85 kgfcm) When installing: Make sure that the LCD cable is attached firmly. 2060 Second LCD bezel (second LCD cover kit) (for ThinkPad W700ds and W701ds) For access, remove these FRUs in order: •...
Page 145
• “2040 Bluetooth daughter card (BDC-2.1) for W700 and W700ds” on page 134 • “2050 LCD panel, hinges, and LCD cable” on page 134 Table 53. Removal steps of second LCD bezel (second LCD cover kit) (for ThinkPad W700ds and W701ds) Torque Step...
Table 53. Removal steps of second LCD bezel (second LCD cover kit) (for ThinkPad W700ds and W701ds) (continued) 2070 Second LCD panel (for ThinkPad W700ds and W701ds) For access, remove these FRUs in order: • “1010 Battery pack” on page 68 •...
Table 54. Removal steps of second LCD panel (for ThinkPad W700ds and W701ds) 2080 Second LCD cable assembly (for ThinkPad W700ds and W701ds) For access, remove these FRUs in order: • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Page 148
“2050 LCD panel, hinges, and LCD cable” on page 134 • “2060 Second LCD bezel (second LCD cover kit) (for ThinkPad W700ds and W701ds)” on page 138 • “2070 Second LCD panel (for ThinkPad W700ds and W701ds)” on page 140 Table 55.
Page 149
Table 55. Removal steps of second LCD cable assembly (for ThinkPad W700ds) (continued) Table 56. Removal steps of second LCD cable assembly (for ThinkPad W701ds) For ThinkPad W701ds: Chapter 9 Removing and replacing a FRU...
Page 150
Table 56. Removal steps of second LCD cable assembly (for ThinkPad W701ds) (continued) ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 151
Table 56. Removal steps of second LCD cable assembly (for ThinkPad W701ds) (continued) Step Screw (quantity) Color Torque 0.392 Nm M2.5 × 4.5 mm, wafer-head, nylon-coated (3) Silver (4 kgfcm) 0.392 Nm M2.5 × 7 mm, wafer-head, nylon-coated (1) Silver (4 kgfcm) Chapter 9 Removing and replacing a FRU...
Table 56. Removal steps of second LCD cable assembly (for ThinkPad W701ds) (continued) 2090 Second LCD hinges and second LCD rear cover (second LCD cover kit) (for ThinkPad W700ds and W701ds) For access, remove these FRUs in order: • “1010 Battery pack” on page 68 •...
Page 153
“2050 LCD panel, hinges, and LCD cable” on page 134 • “2060 Second LCD bezel (second LCD cover kit) (for ThinkPad W700ds and W701ds)” on page 138 • “2070 Second LCD panel (for ThinkPad W700ds and W701ds)” on page 140 Table 57.
Page 154
Table 57. Removal steps of second LCD hinges and second LCD rear cover (second LCD cover kit) (for ThinkPad W700ds and W701ds) (continued) Torque Step Screw (quantity) Color M2.5 × 3.5 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) When installing: After replacing the hinges or the second LCD rear cover and reinstalling the second LCD cable and the second LCD panel, press the second LCD unit into the main LCD rear cover .
Table 57. Removal steps of second LCD hinges and second LCD rear cover (second LCD cover kit) (for ThinkPad W700ds and W701ds) (continued) 2100 Wireless LAN antenna assembly and wireless USB antenna • “1010 Battery pack” on page 68 • “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter”...
Page 156
Table 58. Removal steps of wireless LAN antenna assembly and UWB antenna Torque Step Screw (quantity) Color M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) When installing: As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Page 157
Table 58. Removal steps of wireless LAN antenna assembly and UWB antenna (continued) • For models with a damaged wireless USB antenna installed, remove the damage antenna and should NOT replace it. • For models with a non-damaged wireless USB antenna installed, leave it installed in the computer. Chapter 9 Removing and replacing a FRU...
Page 160
Security keyhole Serial Ultrabay Enhanced latch Serial Ultrabay Enhanced device eject lever Serial Ultrabay Enhanced Digitizer pen RJ-11 (modem) connector USB (Universal serial bus) connectors Digitizer pad Volume control buttons ThinkVantage button ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Front view (for ThinkPad W700ds and W701ds) ThinkLight Integrated camera (for some models) Status indicators Note: For the description of each indicator, see Chapter 6 “Status indicators” on page 55. Stereo speakers Second screen Numeric keypad Fingerprint reader TrackPoint pointing stick...
Digitizer pen RJ-11 (modem) connector USB (Universal serial bus) connectors Digitizer pad Volume control buttons ThinkVantage button Rear view Status indicators Note: For the description of each indicator, see Chapter 6 “Status indicators” on page 55. ExpressCard/Smart Card/CompactFlash card slot ExpressCard/Smart Card/CompactFlash card eject button ExpressCard slot ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
This section contains following lists of the service parts. • “Overall” on page 160 • “LCD FRUs forThinkPad W700” on page 184 • “LCD FRUs for ThinkPad W700ds” on page 188 • “Keyboard” on page 194 • “Miscellaneous parts” on page 196 •...
Overall ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual...
Page 167
See “Miscellaneous parts” on page 196. LCD unit (see “LCD FRUs forThinkPad W700” on page 184, “LCD FRUs for ThinkPad W700ds” on page 188, “LCD FRUs for ThinkPad W701” on page 189, or “LCD FRUs for ThinkPad W701ds” on page 193.)
Page 170
Table 59. Parts list—Overall (continued) No. FRU FRU no. 45N4545 System board assembly, MXM-support, non-TPM for W700 • 2752-CTO, F8x, F9x • 2753-CTO • 2754-CTO • 2757-CTO • 2758-CTO, LYx • 2762-CTO • 2763-CTO System board assembly, MXM-support, TPM for W700ds 45N4546 •...
Page 171
Table 59. Parts list—Overall (continued) No. FRU FRU no. 60Y5656 System board assembly, MXM-support, non-TPM for W701ds • 2500-CTO, 3Ex • 2541-CTO • 2542-CTO • 2543-CTO • 2544-CTO • 4323-CTO • 4326-CTO ODD switch sub card only for W700 and W700ds 42W8045 N 42W8044 N Audio and card reader I/O card for W700 and W700ds...
Page 174
Table 59. Parts list—Overall (continued) No. FRU FRU no. Note: When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU No.s both in HDD slot 0 and in slot 1. SATA hard disk drive, 250 GB, 9.5 mm, 5,400 rpm 42T1471 •...
Page 175
Table 59. Parts list—Overall (continued) No. FRU FRU no. Note: When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU No.s both in HDD slot 0 and in slot 1. SATA hard disk drive, 320 GB, 9.5 mm, 5,400 rpm 42T1583 •...
Page 176
Table 59. Parts list—Overall (continued) No. FRU FRU no. 45N7221 SATA hard disk drive, 500 GB, 9.5 mm, 5,400 rpm • 2752-CTO, FTx, FWx, FQx • 2753-CTO • 2754-CTO • 2757-CTO • 2758-CTO, FQx • 2762-CTO • 2763-CTO • 2500-CTO •...
Page 177
Table 59. Parts list—Overall (continued) No. FRU FRU no. Note: When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU No.s both in HDD slot 0 and in slot 1. SATA hard disk drive, 160 GB, 9.5 mm, 7,200 rpm 42T1465 •...
Page 178
Table 59. Parts list—Overall (continued) No. FRU FRU no. Note: When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU No.s both in HDD slot 0 and in slot 1. SATA hard disk drive, 200 GB, 9.5 mm, 7,200 rpm (FDE) 45N7279 •...
Page 179
Table 59. Parts list—Overall (continued) No. FRU FRU no. Note: When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU No.s both in HDD slot 0 and in slot 1. SATA hard disk drive, 320 GB, 9.5 mm, 7,200 rpm 42T1571 •...
Miscellaneous parts Table 67. Parts list—Miscellaneous parts Screw kit (including nylon-coated screws) for W700 and W700ds: 45N6044 • M2 × 2 mm (black), wafer head (8) • M2 × 3 mm (black), wafer head (15) • M2 × 3.5 mm (black), wafer head (40) •...
Page 203
Table 67. Parts list—Miscellaneous parts (continued) 60Y4909 Base miscellaneous parts for W701 and W701ds: • Foot rubber (front) • Foot rubber (rear) • Insulation sheet (system board) • Slide lock eject • Bracket (puller eject) • Pull lever eject • Coil spring (pull lever) •...
Page 205
Table 71. Parts list—3-pin power cords (1.0 m) (continued) Region CRU ID European countries 42T5029 42T5114 • models -CTO, xxG India 42T5083 42T5168 • models -CTO, xxG Israel 42T5062 42T5147 • models -CTO, xxG Italy 42T5047 42T5132 • models -CTO, xxG Korea 42T5077 42T5162...
Table 72. Parts list—3-pin power cords (1.8 m) (continued) Region CRU ID Taiwan 42T5071 42T5156 • models -CTO, xxV U.K., China (Hong Kong S.A.R.) 42T5035 42T5120 • models -CTO, xxB, xxG, xxH Recovery discs Windows XP Professional (32 bit) DVDs Windows XP Professional (32 bit) DVDs are available as the operating system in the following models, however, Windows XP Professional is not preloaded in the computer: •...
Table 73. Parts list—Windows XP Professional (32 bit) recovery DVDs (continued) Language 58Y0089 Simplified Chinese Slovenian 58Y0107 58Y0108 Spanish Swedish 58Y0109 58Y0111 Traditional Chinese Traditional Chinese (Hong Kong S.A.R.) 58Y0097 Turkish 58Y0110 Windows XP Professional (64 bit) DVDs Windows XP Professional (64 bit) DVDs are available as the operating system in the following models, however, Windows XP Professional is not preloaded in the computer: •...
Table 75. Parts list—Windows Vista Business (32 bit) DVDs Language Brazilian Portuguese 58Y0016 Czech 58Y0018 Danish 58Y0019 English 58Y0042 58Y0041 English (modem-disabled) English, Finnish, and Swedish (in Sweden) 58Y0250 58Y0249 English, French, German, and Dutch (in Belgium and Luxemburg) English, French, German, and Italian (in Switzerland) 58Y0248 French 58Y0020...
Table 77. Parts list—Windows Vista Business (64 bit) DVDs Language English 76Y1993 English (for India) 76Y1992 Windows Vista Ultimate (64 bit) DVDs Windows Vista Ultimate (64 bit) is preinstalled as the operating system in the following models: • 2752-CTO, 3Cx, 63x, 64x, ESx, ETx, EVx •...
Page 211
Table 79. Parts list—Windows 7 Professional (64 bit) recovery DVDs Language Brazilian Portuguese 58Y3753 Czech 58Y3756 Danish 58Y3757 Dutch 58Y3768 English 58Y3781 English (for India) 58Y3758 English (modem-disabled) 58Y3780 English, Finnish, and Swedish (in Sweden) 58Y3783 English, French, German, and Dutch (in Belgium and Luxemburg) 58Y3782 English, French, German, and Italian (in Switzerland) 58Y3784...
Page 212
• 2544-CTO • 4323-CTO, 33x, 34x, 35x, 36x, 37x, 38x, 39x • 4326-CTO, 4Dx, 4Ex, 4Fx, 4Gx Table 80. Parts list—Windows 7 Professional (64 bit) recovery DVDs Language Brazilian Portuguese 58Y4990 Czech 58Y4993 Danish 58Y4994 English 76Y1018 English (for India) 58Y4995 76Y1017 English (modem-disabled)
USB floppy diskette drive for maintenance diskette 05K9283 USB floppy diskette drive tool kit 27L3452 Test card for integrated Smart Card 42W7820 — LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later Note: Download the file from the following Web site: http://www.lenovo.com/spm Chapter 11 Parts list...
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection System Lenovo Rescue and Recovery ThinkLight ThinkPad ThinkVantage TrackPoint Ultrabay Ultrabay 2000 Ultrabay Plus UltraNav IBM (used under license) is trademark of the International Business Machines Corporation in the United States, other countries, or both.
Page 218
Part Number: 43Y9442_07 (1P) P/N: 43Y9442_07 *43Y9442_07*...