Advertisement
Available languages
Available languages
T
FORWARD / REVERSE
SELECTOR
SWITCH with POWER LOCK-OFF
(Fig, 2, 2a, 2b)
Fig, 2
FORWARD
Fig° 2a
REVERSE
Fig_ 2b
POWER LOCK-OFF
The direction
of bit rotation is !orward or reverse and is controlted
by a selector
switch
Iocated above and to the rear of the trigger switch., When holding the dri|tlddver
in the
normal operating
position, (and viewed from the back of the driiI!driver see Figs, 2, 2a
and 2b), the selector switch should be posilioned
(pushed)
a_l the way 1o the LEFT,
for FORWARD
or normal drilling I driving, and positioned
(pushed)
all the way to the
RIGHT for REVERSE
to remove ddll bits alld back out screws°
The third position for lhs selector switch is lccaled in the CENTER (Fig, 2b) This position keeps
lhe trigger swilch Item working, locking the power"OFF
Selling the selector switch in the "OFF
or CENTER position helps reduce Ihe possibility of accidental starling when the tool is nol in use,
l
Z_ CAUTION:
To prevent
gear damage,
ekvays
altow
the chuck
to come to a
]
complele
stop before changing
the direction
of rotation.
REMOVE BATTERY PACK FROM
DRILL / DRIVER (Fig, 3)
1, Place the Forward / Reverse Selector Switch
with Power Lock-Off into thecenter posttion to
lock the power off (see Fig,2, above),,
2 Locate the latches on each s_de of tile batlary
peck,,Depress (squeeze in) latches and pull
battery pack out o! drill,
14
Advertisement
