Hitachi AX-M20EBS Instruction Manual page 18

CD PLAYER SECTION
The ¡/¢ [6] and 4 /1 [12] buttons have several functions:
• At any time, press ¡/¢ [6] to skip to the next track. Press repeatedly to skip multiple
tracks.
• Pressing 4/1 [12] during play returns to the beginning of the current track. Press
it again to skip to the previous track. ( In STOP mode , 4/1 [12] skips to previous
tracks immediately)
• Pressing and Holding either ¡/¢ [6] or 4 /1 [12] buttons during play initiates
the forward or backward search functions.
CASSETTE TAPE SUBSYSTEM
• You may switch recording or playback to either side of a cassette without removing it. If
the cassette is inserted SIDE A up, FORWARD PLAY 3 [19] will play SIDE A and
REVERSE PLAY 2 [29] will play SIDE B.
• Use the FAST FORWARD / REWIND ¡ [22] or REWIND / FAST FORWARD 1
[23] buttons to rapidly advance or rewind the tape.
• Press the PAUSE 8 [28] button to temporarily halt the tape during playback or recording.
Press it again to exit PAUSE mode.
• The STOP 7 [20] button shuts off the cassette tape operation.
• To insert or remove a cassette, use the EJECT
• Do not press EJECT
STOP 7 [20] button and then press the EJECT
• It is advisable to press the STOP 7 [20] button first, before change function to CD,
tuner or AUX.
Use only NORMAL tapes in the cassette deck of this sound system. The characteristics
of the cassette deck mechanisms do not match other types of tape.
PTY button
After selecting "PTY" with the RDS button, Press the PTY
Button to select one of the 16 program types.
PANEL button
When receiving an RDS broadcast, press the PANEL Button
to switch between the frequency, PTY, RT or CT display.
Note that this button will not function if the reception is poor.
Each time the button is pressed, the display mode changes
as follows:
PTY
Frequency
0
[17] button while the tape is playing. If this happen, press the
18
CT RT
Program Service Name
0
[17] button.
0
[17] button.