To Specify Settings For The Browser To Operate Devices; To Specify Power On Settings - Sharp Display Manager Operation Manual

To Specify Settings for the Browser to Operate Devices

The browser used for operating the devices through the network can be specified.
• The browser is used only when devices that can be operated using the browser are selected.
1
Select "Setting (P)" from the "Option (O)" menu and click the "General" tab in the "Setting"
dialog box.
2
Enter the Browser address in the "Path Name" field of "Browser used for accessing to
device".
The default setting is the address of the Internet Explorer.
3
Click the "Apply" button.
4
Click the "OK" button to finish the settings.

To Specify Power On Settings

Set either a simultaneously ON signal is sent ("At once"), or individual ON signals are sent one after another in
fixed intervals, when the power of the devices is switched on collectively.
1
Select "Setting (P)" from the "Option (O)" menu and click the "General" tab in the "Setting" dialog box.
2
Click the "At once" or "Turn on the devices one at a time in order every [xx] second(s)"
radio button in "Power ON Setting" to place a checkmark.
3
If the checkmark is placed in "Turn on the devices one at a time in order every [xx] second(s)",
select the time interval from the pulldown menu.
• The time interval can be set within the range of 1 to 10 seconds (in one second increments).
4
Click the "Apply" button.
5
Click the "OK" button to finish the settings.
21