Connecting To The Video Out Jack And Analog Audio In Jacks - Sharp AQUOS BD-MPC41U Operation Manual

TV Connections

Connecting to the VIDEO OUT Jack and ANALOG AUDIO IN Jacks

• You can enjoy the images through the video jack.
• You can enjoy the TV sound through the ANALOG AUDIO IN jacks.
STEPS
1: Be sure to turn off this system and the equipment before making any connections.
2: Firmly insert the cables all the way into the terminal connector (1, 2, 3 and 4).
To VIDEO output
1
jack
(Yellow)
• Connection for
viewing video
from the system
on a TV.
Video cable (supplied)
(Yellow)
To VIDEO input
2
jack
TV with a VIDEO input jack and ANALOG AUDIO IN Jacks
VCR
Connect directly
This System
After connecting
• Prepare the desired disc or content and start playback (pages 45-54), then enjoy multi-channel mode sound (page 64) or
preset sound mode sound (page 65).
Yellow
AV INPUT
Yellow
NOTE
• Connect the system to LCD TV directly. If you play back the image via
VCR, the image may deteriorate due to the copy guard function.
• When you record the program where copyright is protected, the copy
guard function is activated automatically; the program cannot be
recorded correctly. Also, the playback image via VCR may deteriorate
due to this function. However, this is not a malfunction. When you
watch the program where copyright is protected, we recommend that
the system be connected to LCD TV directly.
LCD TV
Main Unit
(White)
White
(Red)
Red
• Connection for
listening to TV
audio on the
system.
AV
OUTPUT
(White)
White
(Red)
Red
TV
To ANALOG AUDIO
3
IN jacks
Audio Cable
(commercially
available)
To analog audio
4
output jacks
27