Before Starting Playback
Testing the speaker settings
Adjust the volume to 30 before testing the audio level.
(Page 41)
10
Press a/b/c/d to select "Test Start", then
press ENTER.
•
A test tone is outputted from each speaker in the
following order.
L➝C➝R➝RS➝LS➝SW
0dB
10ft/0dB
SW
L
LS
8ft/0dB
Test Start
To select a speaker to be tested, press a/b/c/d to
•
select the speaker while the test tone is output.
•
To stop the test tone, select "Test Tone Stop".
Adjusting the level
When the sound volume level of each speaker is
uneven, adjusting the level separately.
11
Press a/b/c/d to select the speaker with the
setting you want to adjust, then press ENTER.
•
To select the speaker outputting the test tone, press
ENTER.
12
Press c/d to select "Level".
13
Press a/b to adjust the desired level, then
press ENTER.
14
Repeat from steps 11 to 13 for each speaker.
0dB
10ft/0dB
SW
L
LS
8ft/0dB
Completing the settings
15
Press a/b/c/d to select "Finish", then press
ENTER.
16
Press HOME or EXIT to exit.
40
10ft/0dB
C
10ft/0dB
R
RS
8ft/0dB
Finish
Return
10ft/0dB
C
10ft/0dB
R
RS
8ft/0dB
Distance
Level
Return
10ft
0dB