Window Installation - GE AGM14 Owner's Manual And Installation Instructions

WindowInstallationInstructions.
Install the Window Locking Bracket and the Foam Top Window Gasket
[]Attach the window locking bracket with a
type C screw.
I
[]Cut the foam top window gasket to the window
width.
[]Stuff the foam between the glass and the
window to prevent air and insects from getting
into the room.
Install the Air Conditioner in the Case
[]
[]
Slide tim air conditioner into the case.
Reinstall the 2 screws removed earlier on each
side of the case.
Before installing the front grille, pull out the
vent control lever located above the unit
coim'ol knobs, as shown.
[] Attach the front grille m the case by inserting
the tabs on the grille into the. slots on the fi'ont
of the case. Push the. grille in until it snaps into
place.
Guide the lever carefully
through the grille as you
push it in.
f
]Lift the inlet grille and secure the front frame
with a type A screw. Lower tim inlet grille into
place.
14