Safety Instructions - GE AGM14 Owner's Manual And Installation Instructions

IMPORTANT SAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
WARNING!
For your safe_ the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injury.
SAFETY P RECAUTIONS
N Use tiffs appliance only tbr its intended
purpose as described in this Ouamr's
Manual.
N This air conditoner must be properly"
installed in accorxlanee with file Installation
Instnmfions beibre it is used.
@ Turn file mode control m OFFand unplug
your air conditioner beIbre making ally
repairs or cleaning.
NOTE:We strongly reconmmnd that any
selwicing be pertbnned by a qualified
individual.
@ Never unplug your air conditoner by
pulling on tim power coM. Always grip plug
firmly and pull straight out from the
receptacle.
@ Repair or replace iinmediately all electric
service cords fllat have become flayed or
otherwise dain_ed. Do not use a cord that
shows cracks or abrasion dmn_e along its
lengfll or at either the plug or connector
end.
@ For your s_ety...do not store or use
combustble materials, gasoline or other
flammable vapors or liquids in the vicinity"
of tiffs or any other appliance.
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord. For
personal safe_ this appliance must be properly
grounded.
The power coM of tiffs appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall
outlet m minimize the possibility of electric
shock hazard from tiffs appliance.
Have the wall outlet and circuit checked by a
qualified electrician m make sure the outlet is
properly" grounded.
"v@mre a 2-prong wall outlet is encounmred,
it is your pe*:sonal responsibility" and obligation
to have it replaced with a properly grounded
@prong wall outlet.
The air conditioner should always be
plugged into its own individual electrical
outlet which has a voltage rating that matches
tile rating plate..
This provides tim best perfomlance and also
prevents ovefl_yading house wMng circuits
which could cause a fire hazard from
overheated wires.
See tim Installation Instructons, Electrical
Requirements section t:or specific electrical
connection
requirement_s.
2