Code Entry - Hitachi DSS SYSTEM Owner's Manual

HITACHI DIGITAL SATELLITE S YSTEM OWNER'S MANUAL
Code EntW
First, look up the device type and brand in the following charts. You will find a list of numbers,
one or more which should operate your device. There may be more than one code, so you will
need to try each of them to find the one that works best.
While holding down the device key that you are programming, press the power key, and
simultaneously release both keys. The light associated with the device you are programming
should be flashing rapidly. If it isn't, repeat the process.
You are now in code entry mode. Simply use the remote control keypad to enter the four-digit
code. You _ see the lights on the remote light in a circle to indicate that the code was accepted.
The remote "willremember the code until you reprogram it.
Test if the entered code matches your device by pressing the _ key (for DSS, TV, CBL_
or AMP) or the play key (for VCR or DISC). If the device works, you're all sefl Otherwise, repeat
the process using the next code for your brand or try the code scan procedure.
2229,2231,2257
2214,2218,2234
2233,2234
2258,2261
2212, 2226
_a, 4 463, 4476, 4497
4412, 4471
4410, 4412, 4425, 4494
Also see Citizen
4419, 4425, 4483, 4499
4412, 4490
4413,4415
4412, 4424, 4425, 4426, 442_,
4444, 4453, 4455, 4463, 4475,
4485, 4494, 4499, 4522
4455,4521
4412,447%4477
4412,44B9
Page 48