Materials And Basic Tools Needed; Materials Needed; Basic Tools - Kenmore 153.338400 Owner's Manual

Materials Needed
To simplify the installation Sears has availabJe the installa-
tion parts shown below. You may or may not need all of
these materials, depending on your type of installation.
CoupEtn_s
COMPRESSION COUPLINGS
FOR CONNECTING TO
COPPER PLUMBING WITH-
i
J
WATER HEATER
INSTALLATION KIT WITH
FLEXIBLE CONNECTORS FOR
3/4" GALVANIZED OR
1/2_COPPER PLUMBING
OUT SWEAT SOLDERING EXPANSION TANKS FOR
O THERMAL EXPANSION
CONDITIONS AVAIL-
ABLE IN 2 GALLON AND
5 GALLON CAPACITY
THROUGH LOCAL
VENT ELBOW SEARS SERVICE CENTERS
VENT EXTENSION
wmler
__mw_ef
FLEXIBLE WATER
HEATER GAS CON-
NECTOR WITH
FITTINGS
Basic Tools
You may or may not need all of these tools, depending on
your type of installation. These tools can be purchased at
your local Sears store.
Pipe Wrenches (2) 14"
Screwdriver
Tin Snips
6 Foot Tape of Folding Rule
Garden Hose
Drill
Pipe dope or Teflon Tape
GARDEN HOSE 6 FOOT TAPE
SLOT-HEAD SCREWDRIVER PIPE
_ WRENCH
PHILLIPS SCREWDRIVER
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)
PIPE DOPE (SQUEEZE TUBE)
(USE FOR WATER AND GAS CONNECTIONS)
DRAIN PANS
AVAILABLE IN 20 _ DIAMETER FOR
WATER HEATERS HAVING A DIAMETER 18"
OR LESS AND AVAILABLE IN 28" DIAMETER
FOR WATER HEATERS HAVING A DIAMETER
26 _'OR LESS
HACKSAW
3/4 _ WIRE BRUSH
_RUSH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
PROPANE TORCH
SOLDER FLUX TUBING CUTTER
WATER HEATER STAND 24"x24_x18 _'
FOR USE WITH WATER HEATERS INSTALLED
IN RESIDENTIAL GARAGES HAVING A DIAM-
ETER 24" OR LESS AND A RATED CAPACITY
75 GALLONS OR LESS
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soff Solder
Solder Flux
Emery_Cloth
Wire Brushes