Download Print this page
Philips HF-Regulator Intelligent Touch DALI for TL5/TLD/PL-L lamps Specification

Philips HF-Regulator Intelligent Touch DALI for TL5/TLD/PL-L lamps Specification

For tl5/tld/pl-l lamps

Advertisement

Quick Links

Product data
• General Characteristics
Interface
TD
Rated Number of
1 piece
Lamps
Rated Ballast-Lamp
35/49/80
Power
Rated Lamptype
TL5
Application code
E+
Line Voltage
195-240 V
Line Frequency
50/60 Hz
Housing
L 359x30x21
Ignition Method
Warm Start
Lifetime 90%
50000 hr
surv.@Tcaselife
Energy Efficiency
A1 BAT
Index
• Operating Characteristics
Automatic restart
Yes
Battery voltage
176-254
running lamps
Battery voltage lamp
198-254 V
ignition
Control input
Yes (Basic insulation)
protection
Inrush current Peak
28 (max) A
Inrush current Width
0.25 ms
Max ballast on
18 x
MCB(16A type B)
Earth leakage current
0.5 (max) mA
Mains voltage safety
-10%/+10%
(AC)
Mains voltage
-8%/+6%
performance (AC)
Overvoltage protec-
48 hr
tion 320Vac
HF-Regulator Intelligent
Touch DALI for TL5/TL-
D/PL-L lamps
HF-Ri TD 1 35/49/80 TL5 E+ 195-240V
This intelligent high-frequency electronic dimming ballast utilizes the
DALI or Touch and Dim push-button protocol for fluorescent lamps.
It meets A1BAT requirements, thereby pre-empting upcoming
legislation. With a special command you can retrieve the system's
mains power consumption, and with another you can find out which
lamp wattage is connected. Combined with controls, additional energy
savings can be achieved.
Overvoltage protec-
2 hr
tion 350Vac
PowerFactor 100%
0.95 -
output power
Power losses gear
4.5 W
Regulating level
1%-100%
power
Stable lamp operation
> 15°C
temp.
Standby power
0.25 (max) W
consumption
Ballast Lumen Factor
1 -
Crestfactor
1.7 (max) -
Ignition time
1 (max) s
Operating frequency
110 (max) kHz
Total Harmonic
10 %
Distortion EUR
Hum and Noise level
Inaudible
• Wiring Characteristics
Cable-Cap output-
200 (max) pF
wires to earth
Cable-Cap output-
200 (max) pF
wires mutual
Conn.type input
WAGO 251 universal connector
terminals
[Suitable for both automatic wiring
(ALF and ADS) and manual wiring]
Conn.type output
WAGO 251 universal connector
terminals
[Suitable for both automatic wiring
(ALF and ADS) and manual wiring]
Conn.type ctrl input
WAGO 251 universal connector
terminals
[Suitable for both automatic wiring
(ALF and ADS) and manual wiring]
Striplength
8.0-9.0 mm
Dual fixture Master/
Yes [Master/Slave operation possible]
Slave

Advertisement

loading

Summary of Contents for Philips HF-Regulator Intelligent Touch DALI for TL5/TLD/PL-L lamps

  • Page 1 HF-Regulator Intelligent Touch DALI for TL5/TL- D/PL-L lamps HF-Ri TD 1 35/49/80 TL5 E+ 195-240V This intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation.
  • Page 2 HF-Regulator Intelligent Touch DALI for TL5/TL-D/PL-L lamps Wcs Control input 0.50-1.00 mm2 Fixing Hole Distance 350.0 mm terminals Length A2 Wcs Input terminals 0.50-1.00 mm2 Width B1 30.0 mm Wcs Output termi- 0.50-1.00 mm2 Height C1 22.0 mm nals Fixing Hole Diameter 4.1 mm Wcs auto insertion 0.75 mm2...
  • Page 3 HF-Ri TD 1 14/21/24/39 TL5 E+ © 2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com/lighting 2013, April 27 data subject to change...

This manual is also suitable for:

Hf-regulator intelligent touch dali