Wall Mounting A Dss Console Directly On The Wall - NEC 1090030 - DSX Systems PHONE SuperDisp Phone BLAC Hardware Manual

Wall Mounting a DSS Console Directly on the Wall

To mount the DSS Console directly on the wall:
1. Mount two suitable fasteners (such as #8 sheet metal screws) about 3 15/16" apart vertically.
- Leave the heads exposed about 1/4".
2. Fold the DSS Console legs into the wall mount position.
Make sure the line cord is routed through the lower channel in the base.
3.
4. Fold the two leg supports down flush with the legs.
5. Place the DSS Console on top of the wall plate and slide into place.
6. Plug the line cord into the DSS Console mod jack.
3
DSX-40 Hardware Manual
4
Figure 40: Mounting the DSS Console Directly on the Wall
4
2
Wall Mounting
5
1
5
6
Optional Equipment ◆ 61