Philips Flat TV 42PF9936 User Manual page 11

Devices with Progressive scan output (e.g. a digital Set Top box, a video game console or
Progressive scan DVD player" (480p, 576p, 720p or 1080i)
AV3
F_ y/p b/VpGrA2Fh)
®° °I
Connect the device with 2Fh YPbPr output to the VGA
connector (_) (with the supplied adapter cableVGA to
cinch) and to the L and RAUDIO jacks (_) of AV3,
See also the manual of your High Definition device.
Note: This television is designed to accept high de_nition signal
standards 480p, 576p, 720p and 1080i as specifed by the
Electronic Industries Association standard EIA770,3.
Digital devices from different manufacturers have the possibility of
differing output standards which may cause difficulties for the
televssion to properly displa_
Warning: In case you notice scrolling images, wrong colors or no
colour; no picture, or even combinations of these on your screen,
check if the connections are done in the correct way or move
your digital device further away f.om your T_/
DVD
Connect your computer
You may connect your computer to the VGA connector of
AV3 or to the HDHI connector (see further),
O Connect one end of aVGA cable (_) to the video card
of the computer and the other end to the VGA Y/Pb/Pr
2Fh (_) connector at the bottom of theTV,
Fix the connectors firmly with the screws on the plug,
_1 In case of a Multimedia computer, connect the audio
cable (_ to the audio outputs of your Multimedia
computer and to the AUDIO R (right) and L (left)
inputs.
The VGA connector allows the following TV and
monitor display modes:
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz (30PF9946 only)
Note:
If possible, use the XGA102 4x7 68@60Hz video mode to
obtain the best image quality for your 30PF9946 LCD
monitor: