Auto Program; Editing Of Channels - Philips Flat TV 42PF9936 User Manual

How to search for TV channels
I TV Menu
Picture Language
Sound Tuner Mode|
Features Auto Program I
Install I_ Channel edit I
Mode
J
If you want to re-install yourTV proceed as
follows:
O Press the MENU button on the remote
control.
Use the cursor up/down to select Install.
Press the cursor right to enter the Install
menu.
Select the menu language
O Use the cursor left/right.
Press the cursor up/down to select your
language.
Select the Tuner mode
Allows you to change the TV's signal input to cable,
antenna or auto mode.The auto mode setting
helps theTV determine the type of signal or
channels being received when auto program is
activated,
0
O
Select Tuner
Mode in the Install menu.
Press the cursor right,
Note: It is recommended to keep the pmdeflned
Automatic way of autopro_rammin_. In case of
di_culties in autopmgrt_mming with the automatic
method choose for Antenna or Cable whether
antenna or cable signals are present.
When Auto is selected, theTV will
automatically detect whether or not cable
signal input is present.
When Antenna is selected, theTV will detect
antenna signals and will search for all antenna
TV channels available in your local area.
When Cable is selected, theTV will detect
cable signals and will search for all cable TV
channels available in your local area.
Store TV channels )
Auto Program
Ih Auto Program 1
annel .._. ....
0 Select Auto Program in the Install menu.
Note:All channels must be unlocked in order to
autopro_ram. If requested enter your code to unlock
all channels. (See TV,Features, AutoLock, p. 11.)
_1 Press the cursor right.
The autostore option
label Start ? appears.
0 Press the cursor right.
0 The progress of autoprogramming is displayed.
Editing of channels
_< Channel Edit )
hannel I_
ipped On/Off
This feature allows you to edit or skip channels
from the channel list which have bad of weak
signals or channels which you do not watch often,
Note: Once a channel is skipped, you cannot select it
with the -P+ button; you can only access the channel
with the digit buttons.
0 Select Channel Edit in the Install menu;
_1 Press the cursor right to enter the channel list.
0 Select the channel you want to skip with the
cursor left/right.
0 Press the cursor down.
Select On or Off,
Press the cursor up/down to select another
channel and repeat steps 0 - O.
Q Press the MENU button to return to the Install
menu.
Note: To add back channels to the list, repeat steps
OtoO.