Table of Contents
Advertisement
_..
, :_ •
_
:
i!_ .,
:
Pro-Tect
Plus
TM
Locking
Feature
To disable the usage of the VCR, or to protect your timer
recordings,
you can lock the VCR so that the buttons on the VCR
or remote won't work.
•
To Lock: Press and hold POWER or VCR on the remote for
approximately
six seconds. SAFE appears in the display to
let you know the feature is activated.
•
To Unlock: Press and hold POWER or VCR on the remote for
approximately
six seconds.
Tracking
Your VCR has automatic
tracking
which removes the streaks or snow
from the picture. Automatic
tracking
is activated when you insert a
tape or turn on the VCR. Occasionally you may need to manually
adjust tracking,
especially if the tape was recorded
on a different
VCR. Just use the TRACKING buttons to remove the streaks or snow.
You can also use tracking
when you PAUSE a tape to reduce jittering
of the picture.
When you manually adjust the picture, automatic
tracking
is turned
off. To turn automatic
tracking
back on, press both TRACKING
buttons on the front of the VCR at the same time, or eject the tape
and re-insert it.
Tracking has no effect during recording--only
playback.
Time
Counter
The time counter shows the actual time it takes to record a
program
or play back a segment of a recorded tape. It helps
locate the beginning
or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
For example, if you record a 30-minute
program
at the beginning
of the tape and you want to go to the end of that program to
begin another
recording, you would:
1.
Press INFO twice
to display the time counter.
2.
Press CLEAR to reset the time counter to 0:00:00.
Hours
Minutes
0:30:00
l
Seconds
Locking
Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
46
Advertisement
Table of Contents
