Table of Contents
Advertisement
Pro-Tect
Plus
TM
Locking
Feature
To disable the usage of the VCR, or to protect your timer recordings,
you can lock the VCR so that the buttons on the VCR or remote
won't
work.
To Lock:
Press and hold VCR on the remote
for approximately
six seconds.
The VCR turns
off. SAFE appears
in the display
if
any button
is pressed
to let you know
the feature
is activated.
To Lock
while
a timer
recording
is in progress:
Press and
hold VCR on the remote
for approximately
six seconds.
SAFE
appears
in the display
to let you know
the feature
is activated.
To Unlock:
Press and hold VCR on the remote for
approximately
six seconds. The VCR turns on.
Time Counter
The time counter shows the actual time it takes to record a
program
or play back a segment of a recorded tape. It helps
locate the beginning
or end of programs you taped. The time
counter resets to 0:00:00 whenever
the tape is ejected from
the VCR.
For example, if you record a 30-minute
program
at the
beginning
of the tape and you want to go to the end of that
program to begin another
recording,
you would:
1.
Press INFO twice
to display
the time
counter.
2.
Press CLEAR to reset the time
counter
to 0:00:00.
3.
Press FORWARD
to forward
the tape
until
the time
counter
reads 0:30:00.
,
,
Press STOP.This is the approximate
end of the program.
(You may want to press PLAY to verify.) Now, you can begin
recording
at this spot.
Press INFO to remove
the time
counter
from
the screen
and
return
to the normal
display
mode.
0:30:00
Hours
I
Minutes
Seconds
Locking
Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
49
Advertisement
Table of Contents
