Table of Contents
Advertisement
eject the tape and re-insert
it. Tracking has no effect during
recording - only playback.
Pro-Tect
Plus
TM
Locking
Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons
on the VCR
or remote won't work.
To Lock: Press and hold the VCR button on the remote
for approximately
six seconds. SAFE appears in the VCR's
display panel when the VCR is locked.
To Lock While
a Timer
Recording
is in Progress:
Press
and hold the VCR button on the remote for approximately
six seconds.
To Unlock:
Press and hold the VCR button on the remote
for approximately
six seconds.
Locking Your VCR:
If a timer recording
is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
Time
Counter
The time counter shows the actual time it takes to record a
program
or play back a segment of a recorded tape. It helps
locate the beginning
or end of programs you taped. The time
counter resets to 0:00:00 whenever
the tape is ejected from
the VCR.
For example, if you record a 30-minute
program
at the
beginning
of the tape and you want to go to the end of
that program to begin another
recording,
you would:
1.
Press INFO twice
to display the time counter.
2.
Press CLEAR to reset the time counter to 0:00:00.
3.
Press FORWARD to forward
the tape until the time counter
reads 0:30:00.
,
,
Press STOP. This is the approximate
end of the program.
(You may want
to press
PLAY to verify.)
Now, you can
begin
recording
at this
spot.
Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
0:30:00
43
Advertisement
Table of Contents
