Preventing The Unit From Toppling Over - Sony BRAVIA KLV-40U100M Operating Instructions Manual

Introducing the Unit
Installing the Unit
Preventing the Unit
from Toppling Over
Attaching the Support Belt
_o
1 Screw the support belt (supplied) to the unit stand with a wood screw
(supplied).
2 Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
3 Adjust the length by pulling the support belt towards you while holding
the unit stand.
/_ Be sure to take measures t° prevent th e unit from toppling over and
:__,_ DePending on the materia! used for the stand you chos e fo[ this unit, the
supplied wood screw may not be suitable. Consult your dealer about the
type of screw you can use for this unit and you[ stand, You wi!l need
screws that are 3 to 4 mm (_/8 to
3/16
inches) in diameter.
When Mounting on a Wall
See tile Instruction Guide supplied with tile wall-mount bracket on how to
mount the unit on the wall.
11