Basic Procedure Of Adjustment Menu - Fujitsu Plasmavision P42VHA51W SERIES User Manual

BASIC PROCEDURE OF ADJUSTMENT MENU

• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
E-16
1
Press .
The main menu screen will appear.
2
Press or
Each time you press
menus appears in the following sequence:
PICTURE POSITION/SIZE
FACTORY DEFAULT
The PICTURE Menu screen will appear.
3
Press or
4
Press .
The "Tint" adjustment screen will appear.
5
Press or
: More greenish colors
: More purplish colors
6
Press to store.
7
Press when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select "Default" and press
The PICTURE items are changed back to the default
settings available when the plasma display was
purchased.
* Press to halt the operation in progress.
to select "PICTURE".
or , one of the available
AUDIO FEATURES
to select "Tint".
to change tint values.
.
"PICTURE" selected in the main
menu screen
"Tint" selected in the PICTURE
Menu screen
"Tint" adjustment screen