Display Section - Bottom - Fujitsu Plasmavision P42VHA51W SERIES User Manual

PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION – BOTTOM
/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
HDMI input terminal (VIDEO5 INPUT/HDMI)
HDMI input terminal (VIDEO6 INPUT/HDMI) *Model P42VHA** does not have this terminal.
Connect this terminal to the HDMI output terminal of DVD recorder/player or other video equipment.
If the HDMI output is connected, an Audio signal cable does not need to be connected.
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-4.)
RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the output terminal of a PC, set-top box, game, etc.
Component video input terminal (VIDEO3 INPUT)
Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the Component video output terminal of DVD recorder/player or satellite receiver.
Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
Audio3 input terminal (AUDIO3 INPUT)
Audio2 input terminal (AUDIO2 INPUT)
Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
Power input terminal
Connect this terminal to the power cord supplied with the plasma display.
When connecting the cord, attach a ferrite core to the cord. (See P. E-4)
The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see Audio Input on P. E-23.
Video input
RGB1(mD-sub)
Video1(Video)
Video2(S-video)
Video3(Component Video)
Video4(Component Video)
Video5(HDMI)
Video6(HDMI)
Note
• The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.
E-6
Audio input
Audio1
Audio2
Audio2
Audio3
Audio3
Audio4(HDMI)
Audio5(HDMI)
*Model P42VHA** does not have this terminal.