Nam; Rp-C/Rp-C6 - Hitachi GR2000 Series Installation Manual

3.4.2

RP-C/RP-C6

The RP-C and RP-C6physically appear as Figure 3-21. The switch, LED display
functions of the RP-C and RP-C6 are the same as those of the RP-A1. The additional
LEDs are for test purposes only.
Figure 3-21 RP-C/C6 Front Panel View
Switch and LED indication
Table 3-14 RP-C/RP-C6 switch and function of LED indications
Name of switch

Nam

and LED
STATUS LED: Green/
Yellow/ Red
S1 LED: Green
S2 LED: Green
S3 LED: Green
S1 LED: Green
S2 LED: Green
S3 LED: Green
GR2K-GA-1002
Rev. 6.03
#
%
 $
$
#
Status Content
Shows the operating Green: Operable operation
condition of RP. Yellow: Blocking and cock insertion and removal
possible.
Green blinking: Under preparation (being started up.)
Red: Fault
Extinguished: Operation not possible (Including the
device power supply being turned off)
Don't care
Don't care
Don't care
Don't care
Don't care
Don't care
#  
#  # 
#
# #
$ $
$
" "
"
Component Details
or
"  

"
3-17