Installing Your Vga Adapter - Fujitsu MVGA-NVG11A User Manual

2.2 Installing your VGA adapter

1. Power off your computer, remove its outside cover, and then assert yourself by
touching the power supply of your computer.
Note: Before installing your new VGA card, you must first set the VGA
option to either Standard VGA or Standard Display VGA.
2. Remove your old graphics card, and install your new VGA card into the AGP
slot.
MVGA-NVG11A
MVGA-NAG11AL
MVGA-NVG11AT
MVGA-NVG11AM
MVGA-NVG11AD
3. Align and secure the mounting bracket of your new VGA card to your computer
and replace your computer cover.
4. Connect your monitor cable to the DB-15 connector at your new VGA card.
Tur n Off
5. Power on your computer.
AGP slot
PCI slot
AGP mainboard
Tur n Off
MVGA-NVG11P
MVGA-NVG11PT
!!! Caution !!!
Before you turn on your system,
you have to be sure the VGA card
is setup already and all the cables
are connected.
DO NOT connect / disconnect
TV-out cable when your TV or
PC is Power On.
10
PCI slot
AGP mainboard